The NEW Build Your Own Arcade Controls
Main => Project Announcements => Topic started by: mafiafan123 on May 11, 2015, 03:19:45 pm
-
Hi everyone this is my first post, I have looked into building a cabinet for some time now and have tried to figure out as much as I can by reading fourms etc.
I do have some questions and if you can suggest any ideas please do. I will update as this build goes on ;D
I have an old xbox v1.3 that was already soft modded since then I have loaded coin ops and set it as the default launch.
Now my build is basicly the following:
CoinOPS Xbox with 2x KADE w USB Adapter
(http://oi57.tinypic.com/vidkp.jpg)
Bartop Kit
(http://oi61.tinypic.com/296m007.jpg)
Happ Controlls from Ebay
There is a video of the cabinet being put together here but it does not look proper to me :dizzy:
See https://www.youtube.com/watch?v=syTjVLFBIQo (https://www.youtube.com/watch?v=syTjVLFBIQo)
The cabinet was pretty rough when I got it so ive already started sanding and putting primer on
See picture
(http://i61.tinypic.com/2qdc19k.jpg)
Ive read about using wood battons and woodglue should I do this or just use screws and cover with wood filler?
Also thinking about doing vinyl overlays but I do not know how to properly get dimensions etc.
Also I do not have a router would a dremel and the following bit work for T-Molding http://www.dremel.com/en-us/Accessories/Pages/ProductDetail.aspx?pid=543 (http://www.dremel.com/en-us/Accessories/Pages/ProductDetail.aspx?pid=543)
Also sorry if this is confusing im confused myself lol ???
-
There aren't any pockets or batons on that design? And they didn't cut t-molding slots for you? Ugh. I'd use clamps and glue and pocket holes from the inside. Why marr the outside surface.
-
There aren't any pockets or batons on that design? And they didn't cut t-molding slots for you? Ugh. I'd use clamps and glue and pocket holes from the inside. Why marr the outside surface.
Sadly the removed it and change the style right before ordering and I didn't notice.
No T-Molding slots either I have a dremel but I hear work doesnt come out clean.
I bought some clamps this weekend at Lowes, Ill finish primer this weekend and start the battons.
I do have one question given that the wood is ¾” thick (cabinet built is only 19 ¼ wide, 21” tall, and 16 ½” deep) would 1 1/4 screws work for battons also what would I use 1x1?
Thanks! :cheers:
-
I use 1 1/4 drywall screws. Work well. Use plenty of glue.
-
What Yots said. 1-1/4" course thread drywall screws. Inexpensive, plenty of grab. Is the wood you are working with a melamine? If so, the glue isn't gonna do much. Still use it, but unless you remove the laminate from where you attach the battens, it won't be anywhere near as strong.
-
What Yots said. 1-1/4" course thread drywall screws. Inexpensive, plenty of grab. Is the wood you are working with a melamine? If so, the glue isn't gonna do much. Still use it, but unless you remove the laminate from where you attach the battens, it won't be anywhere near as strong.
The wood is Birch (blondewood) plywood I think, Also I haven't applied laminate yet I was going to coat everything in primer first well the outside anyhow. For security I should just do both glue & screws correct?
I know I will wrap the control panel and im really worried if I dont go with t-molding it will look bad. Thoughts?
-
No it will look fine. Just get some strong Gorilla glue and some clamps.
That kit reminds me of my weecade I got on Ebay. No batons. :lol
You could remove the guts of the xbox to get extra room, here is the xbox cabinet master at work:
https://youtu.be/h8QIjfSazK8
-
No it will look fine. Just get some strong Gorilla glue and some clamps.
That kit reminds me of my weecade I got on Ebay. No batons. :lol
You could remove the guts of the xbox to get extra room, here is the xbox cabinet master at work:
https://youtu.be/h8QIjfSazK8
;D Thats actually one of the tutorials I had been looking at theres a whole section on google docs. I think I might keep the xbox intact except for the power wire I will be running. Unfortunately the weather here has been non stop rain and everything is so humid Ive stopped for now hoping it will get better towards end of the week. Ark do you have pictures of the build without using battens? Im starting to lean towards them now though.
-
Don't use a Dremel for t molding slots. It is not only inefficient, it is very dangerous.
-
I found a router table to work really well for doing t-molding.
-
I found a router table to work really well for doing t-molding.
Budget wise im skipping the router for now ill get one when I start on my next build. I bought wood battens last night so looks like I changed my mind once again lol. Now I just need to find a speaker template and speakers/amplifier.
Do the following look ok?:
http://www.ebay.com/itm/Shielded-Speaker-by-Happ-great-for-MAME-/320451818816?pt=LH_DefaultDomain_0&hash=item4a9c6ab540 (http://www.ebay.com/itm/Shielded-Speaker-by-Happ-great-for-MAME-/320451818816?pt=LH_DefaultDomain_0&hash=item4a9c6ab540) Speaker
http://www.ebay.com/itm/Arcade-Home-Theater-Speaker-Amplifier-Jamma-Mame-and-other-Stereo-2-Channel-/331033313870?pt=LH_DefaultDomain_0&hash=item4d131f824e (http://www.ebay.com/itm/Arcade-Home-Theater-Speaker-Amplifier-Jamma-Mame-and-other-Stereo-2-Channel-/331033313870?pt=LH_DefaultDomain_0&hash=item4d131f824e) Amplifer
still trying to figure out the power I was thinking xbox wired to arcade switch but im wondering if I solder the monitor button to the same wires if they will both turn on and off at the same time or if I need some kind of junction/hobby box wired up :dunno in the tutorial im doing its a euro plug 220v and I cant seem to find the same box he used/ also worried about a strain on the xbox if I run anything off of it.
-
I know I will wrap the control panel and im really worried if I dont go with t-molding it will look bad. Thoughts?
Budget wise im skipping the router for now ill get one when I start on my next build.
Wait. I'm curious to how you're going to manage this. No t-molding to me sounds like you're going to round-over the edges? But how will you do this without a router? Or are you just going sand the edges?
In my opinion, if you're going to be applying laminate to the wood and not "cap" the edges with molding, it's going to look ugly.
A router is pivotal in cabinet building.
-
I know I will wrap the control panel and im really worried if I dont go with t-molding it will look bad. Thoughts?
Budget wise im skipping the router for now ill get one when I start on my next build.
Wait. I'm curious to how you're going to manage this. No t-molding to me sounds like you're going to round-over the edges? But how will you do this without a router? Or are you just going sand the edges?
In my opinion, if you're going to be applying laminate to the wood and not "cap" the edges with molding, it's going to look ugly.
A router is pivotal in cabinet building.
I agree about the router I think I am just going to wrap the control panel and insert a marque.
Maybe something like this?
(http://www.koenigs.dk/mame/eng/megacade.jpg) - Grabbed from google
-
Update.
Put some of it together I am at a wall though :cry:
Im thinking of using a dell 1901 FP - Note on the picture (below) I have it on a stand it has not been mounted yet thus no room for marque.
My question is how much of an angle should I do for the monitor should it touch the bottom controls?
Also what mounting hardware should I use the screws in the back are to small maybe a dumb question lol but were can I find some longer screws that wont tear the threads. Do I need to take the monitor plastic off since it will be covered by a bezel, ive seen alot of people do this though.
Also there is a small GAP in control panel and in back but I put wood filler on it and will sand it smooth.
Picture update
(http://i59.tinypic.com/11qlfzd.jpg)
Thanks! :cheers:
-
I will look for the pictures for you. It really looks very cool. Leave the monitor plastics on, and get a nice bezel cut and mask off the buttons.
Before you know it, the build will be done, artwork, and coinOPS installed.
I think you did a very nice job there. :applaud:
Congrats! :cheers:
-
nice work ! Yeah, I know what you mean about "no room for bezel". A lot of pre-builds don't seem to leave much room and I've seen many pre-made cabinets (that come with innards and all) online that have weird bezels. It seems common to have some space either side but none above and below. That's just weird to me. I don't recall any "real" machines ever having no bezel above and below the monitor, it just looks a bit odd.
I got the monitor in my machine for £10 from a car boot, which is where I find most 4:3 monitors. You can't check someplace like that for a smaller one ? The monitor you have looks good but, yeah, there's going to be little space for it in that build. Depends, you could "force" an artificial bezel as those dell monitors have good menu systems wherein you can scale the screen size. You could just shrink the display a little so there is a black border around the whole thing, thus making sure everyone playing/watching could see all that's going on. I would never put the joysticks at such an angle/distance that they could get in the way of the actual screen.
I'm currently building my first vertical bartop which is proving to be a total nightmare (just in terms of getting the right software) but I'm really happy with the outside design. I made it from £8 worth of scrap wood that I picked up so I'm pretty stoked that I've kept that cost right down. I have a whole box of joysticks, buttons and microswitches kicking around so I didn't need to splash out anything on them, which was nice :-)
I didn't go down the t-mold route, either, as I've no way to cut the channels here at home. I have only a jigsaw and a circular saw so can't really do much complex woodworking but it's enough for me :-) Instead of t-mold I went to the hardware store and picked up a 4 metre length of 16mm wide bowed edging wood and just glued that to the edges, filled any gaps between the cabinet and it and then masked it off and painted it. I should have painted it first, tbh, I put the back parts on it last night (this is an older picture, they're not on in this shot) and I painted them first. Much less hassle ;-)
Good luck with your build and post some more photos as you continue !
(http://s1.postimg.org/fd0h0hknz/arcade.jpg)
-
one thing I find bugging/weird about these online kits is that they nearly always use 16-18mm mdf or board for the control panel. I think that's silly (unless you route out the underside for the joystick). Arcade joysticks are pretty short and most will give you not much room if you sub-mount on 16 or 18 mil. I used 10 mil mdf for my control panel on the latest cabinet and did so in the past, also, for the horizontal cabinets. It gives much more space for sticks, I find. Then again, each to their own :-)
-
agreed.. I had to route out the control panel on the bartop kit I purchased as well. I also had purchased a 16guage metal control panel off ebay I hope to use as well which is even more optimal.
-
I will look for the pictures for you. It really looks very cool. Leave the monitor plastics on, and get a nice bezel cut and mask off the buttons.
Before you know it, the build will be done, artwork, and coinOPS installed.
I think you did a very nice job there. :applaud:
Congrats! :cheers:
one thing I find bugging/weird about these online kits is that they nearly always use 16-18mm mdf or board for the control panel. I think that's silly (unless you route out the underside for the joystick). Arcade joysticks are pretty short and most will give you not much room if you sub-mount on 16 or 18 mil. I used 10 mil mdf for my control panel on the latest cabinet and did so in the past, also, for the horizontal cabinets. It gives much more space for sticks, I find. Then again, each to their own :-)
Ok, A tiny update. I probably will not get much time to mess with the cabinet until the weekend.
I just noticed something. The holes for my controls are not the same size :banghead: I am using official Happ controls.
Does anyone happen to know the size of the hole that should be the right for the buttons?
I have an 1 1/8 bit and was wondering if that would be enough but I dont want to mess something up this far along lol
I put the joystick together but can not figure this little clip on the bottom I dont want to break it
Pictures below of everything I have talked about
Should I widen with this bit?
(http://i59.tinypic.com/2u9ih6e.jpg)
How does this go on here (metal ring in picture) to stop the square part from falling from switches?
(http://i57.tinypic.com/nx87k4.jpg)
Back board buttons fit, He changed his kit the week I purchased. So I am guessing I also got some of the old kit. Seller said he updated the holes to Happ specs.
(http://i61.tinypic.com/im8npv.jpg)
Bad timing I guess? :blah:
If I can get this sorted out next will be put in speakers,paint ,buttons & kade along with wrapping the control panel and ordering the marquee :)
-
I'd be very careful on widening the holes with that bit unless you have things very secure and are using a drill press, otherwise it's just going to jump about and splinter the buggery out of everything. With regards to what sizes the holes "should" be, it depends, there are a couple of different sizes for standard buttons :-/ Best thing is to just put the bit next to your buttons and check it it's a tad wider, then it's okay. I'm not sure on the collar for the stick, I don't have those kind of sticks. It looks maybe like a restrainer that might go on the bottom to make the stick 4 directional (instead of 8) but that's a total and utter guess and is most probably wrong :-/
Seems like you are having some issues with this kit. I wish people wouldn't sell this kind of stuff on ebay without thinking it through first. It's all well and good to get a "perfect" kit where everything is marked to slot together so mistakes are impossible but people selling things that require work afterwards, hmm, that's a bit lame. Not all of us have access to tools and suchlike (which is usually, surely, why one would buy such a kit in the first place !?!?). We bought a 2 player flat pack kit ages back and this is what prompted me to start making my own, it was a complete mess and was about £90 for a bunch of MDF that would have cost about a tenner and was cut/drilled in a manner that I wouldn't have been happy with had I done it myself. I got in touch with paypal and returned the item for a refund in the end as it was just a piece of junk :-(
Again, the amount of manufacturers who supply with 18mm control panels unrouted is just stupid. It's like some hobbyist has just thought "duh... people play arcades... duh.... I can cut mdf.... duh..... I can use ebay". Not really fair on customers and it's shows lack of forethought.
-
also, for potential vinyl overlays, can't you just measure the parts then add a 1/2 cm or thereabouts to each side to allow for "bleed" (don't put anything important in this area) and then do the design in photoshop using the rulers function (with guides for the bleeds) so you can make sure everything is hunky dory ?
Should be quite simple. Then just fit the vinyl, flip the board upside down and trim off the excess with an exacto knife :-)
-
(http://i59.tinypic.com/11qlfzd.jpg)
Take a look here and learn how it's supposed to be done:
http://www.koenigs.dk/mame/eng/stepweecade.htm (http://www.koenigs.dk/mame/eng/stepweecade.htm)
-
Take a look here and learn how it's supposed to be done:
http://www.koenigs.dk/mame/eng/stepweecade.htm (http://www.koenigs.dk/mame/eng/stepweecade.htm)
I just wanted to put out there I have been reading tutorials, I've just been updating people as I go :dunno
I have watched Degenatrons along with this link you sent me http://www.koenigs.dk/mame/eng/stepweecade.htm (http://www.koenigs.dk/mame/eng/stepweecade.htm) (actually had it bookmarked lol).
The issue is the kit was missing alot parts or correct work done and was just slapped together example holes were not all the same side some was not sanded there was no cut for t-molding alot of little things that added to alot.
Anyhow I managed to fix the holes with a drill a steady hand and some sanding so now I can start work on the control panel.
(http://s23.postimg.org/g7t6vnckb/20150517_114153_1.jpg)
CoinOPS set to default.xex at boot (Replaced dash-softmod)
(http://s27.postimg.org/t8494tymb/20150517_214230.jpg)
Capacitor was blow ewww lol so I just removed it (Clock - I dont mind setting it when its first plugged in it will keep time long as there is power)
(http://s9.postimg.org/g5qbbuzn3/20150517_212443.jpg)
(http://s30.postimg.org/6wuzgegdd/20150517_212330.jpg)
Im trying to do everything correctly and working with what I have I posted the pictures for anyone who is curious or may have even bought the same kit if this not the correct place then let me know so other wise :cheers: ill update when I have something else.
Next should have speakers, monitor and system wired up. Then will just be paint/vinyl control/marquee im excited lol ;D
-
:dunno Kade issue. EDIT - Nevermind I had a bad ground wire.
-
I put the joystick together but can not figure this little clip on the bottom I dont want to break it
How does this go on here (metal ring in picture) to stop the square part from falling from switches?
(http://i57.tinypic.com/nx87k4.jpg)
You have to press up on the black square piece on the bottom so that the metal ring slides into one of the grooves on the shaft - easiest way I have found is to turn the joystick upside done so the stick is on a table surface then using one hand press down on the black square piece so that the groove on the joystick shaft is exposed and then slide the e-clip into the groove (once it is in place a small amount it will hold itself there so that you can then press the ring onto the shaft with the end of a screwdriver or pair of needle nose pliers to clip it into place) - Be careful when putting it on as they tend to fly across the room and are hard to find if you let the black square piece go before the clip is in the groove.
Here's a youtube video that shows installing the clip at approx 3:40 in the video (it shows swapping the happ joystick into an x-arcade but at about 3:40 in the video shows installing the new happ joystick along with placing the e-clip on ( https://www.youtube.com/watch?v=6jeZe_w4OfA (https://www.youtube.com/watch?v=6jeZe_w4OfA) )
-
Thanks JDFan I figured it out earlier.
Its been a very very slow build :embarassed: not to mention its my first.
but since my last post I have gotten the following done.
Speakers ordered
New monitor - went widescreen better fit and well I dropped the other. Just like in the tutorial ha :laugh2:
Speakers fitted
Everything primed ready for paint
Control panel tested with kade and wired up (Fixed a ground issue)
Still need to
Paint *is this kind ok? Everything has been sanded and primed
(http://images.lowes.com/product/converted/071915/071915244117lg.jpg)
Design a marquee (I'm horrible at photoshop - I'm a MS Paint kind of guy lol)
Design a background for control panel
Fit Plexi
Order Component to VGA adapter & maybe a SLG (thoughts on this?)
Some random pics also please disregard the wiring in picture ill clean that up when I actually install everything it was just for testing.
Much better fit its an ACER 19in
(http://s15.postimg.org/whyw40zt7/20150528_195613.jpg)
Happ speakers - Hopefully they sound fine
(http://s8.postimg.org/szm43xxgl/20150528_180933.jpg)
Wires everywhere Kade test
(http://s13.postimg.org/4w1d8yabr/20150528_141354.jpg)
Since I dont have a router for T-Molding and skipped that part I may go the route that deano71 did with car trim it looks nice. Obviously by my next build I will have one.
-
Update:
Got the paint on today well still have some touch up to do but I really am digging the orange color no drips or runs.
See Pictures below (im not finished yet)
Im using blue buttons and a blue stick red buttons and a red stick though. Im really trying to come up with a marquee but im drawing a blank. Its running Coinops 4 I did a google search but on the marquee and button background I just cant find anything does anyone have some artwork they dont mind sharing? :dunno
(http://s7.postimg.org/4e8s9b8wb/20150531_134917.jpg)
(http://s7.postimg.org/bvhzoiyff/20150531_134707.jpg)
(http://s7.postimg.org/4419pyua3/20150531_132324.jpg)
Ideas for a marquee? just google search I would not use the artwork without asking the creator or without permission fyi
Its okay but I just dont know about the whole mame thing just seems to generic
(http://home.btconnect.com/rharnwel/websites/SadGamerGeek/photos/artwork_marquee_atomicorange.jpg)
Help please lol
-
Thinking of doing this marquee
(http://s8.postimg.org/4q9wfs3h1/mame_marquee.jpg)
and this control panel
(http://s4.postimg.org/w7gvv6jzx/Mortal_Kombat_Logo_wallpaper_android_desktop.jpg)
Source here http://solidwallpapers.com/wp-content/uploads/2015/01/Mortal-Kombat-Logo-wallpaper-android-desktop.jpg (http://solidwallpapers.com/wp-content/uploads/2015/01/Mortal-Kombat-Logo-wallpaper-android-desktop.jpg)
Can anyone do the control panel background without the MK Logo? ??? :dunno, Also any suggestions on LED Backlighting?
-
Thinking of doing this marquee
(http://s8.postimg.org/4q9wfs3h1/mame_marquee.jpg)
Holy crap!
and this control panel
(http://s4.postimg.org/w7gvv6jzx/Mortal_Kombat_Logo_wallpaper_android_desktop.jpg)
Source here http://solidwallpapers.com/wp-content/uploads/2015/01/Mortal-Kombat-Logo-wallpaper-android-desktop.jpg (http://solidwallpapers.com/wp-content/uploads/2015/01/Mortal-Kombat-Logo-wallpaper-android-desktop.jpg)
Can anyone do the control panel background without the MK Logo? ??? :dunno, Also any suggestions on LED Backlighting?
Now that I like better. Even going with a MK theme might be nice. You have a fighter layout.
Just a friendly suggestion - Why not come up with a single unifying theme as opposed to "Every character, art style, and arcade thing under the sun"?
-
Thinking of doing this marquee
(http://s8.postimg.org/4q9wfs3h1/mame_marquee.jpg)
Holy crap!
and this control panel
(http://s4.postimg.org/w7gvv6jzx/Mortal_Kombat_Logo_wallpaper_android_desktop.jpg)
Source here http://solidwallpapers.com/wp-content/uploads/2015/01/Mortal-Kombat-Logo-wallpaper-android-desktop.jpg (http://solidwallpapers.com/wp-content/uploads/2015/01/Mortal-Kombat-Logo-wallpaper-android-desktop.jpg)
Can anyone do the control panel background without the MK Logo? ??? :dunno, Also any suggestions on LED Backlighting?
Now that I like better. Even going with a MK theme might be nice. You have a fighter layout.
Just a friendly suggestion - Why not come up with a single unifying theme as opposed to "Every character, art style, and arcade thing under the sun"?
I think I want to go the mortal kombat route but Im not good enough in Photoshop to make a marquee like that. Maybe have something that says Mortal Cabinet / Bartop Kombat or something similar?
Also add these on both side sides (http://levelupnews.com/wp-content/uploads/2012/01/mortal-kombat-logo.jpg)
:dunno
Thanks for the thoughts every bit helps
-
Marquee
(How hard is it to change the purple in photoshop is it just a filter)
(http://83.152.12.25/wordpress/wp-content/uploads/2014/12/marqueelq.jpg)
(http://media-geeks.com/wp-content/uploads/2011/05/15/mortal-kombat-review.jpg)
Control Panel art?
1.
(http://images4.alphacoders.com/174/174854.jpg)
2.(http://www.entertainmentbuddha.com/blog/wp-content/uploads/2015/03/mortal-kombat-x-mobile.jpg)
Just need to order my componet to Vga and speaker amp this week and I will be done! ;D Well aside from the art which I will prob order from http://www.gameongrafix.com/ (http://www.gameongrafix.com/)
I know my build is slow and its so silent in here lol but any thoughts :dunno
-
How about Malenko's designs? You could always ask him. :)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=69808.0;attach=84012;image)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=328715;image)
DeLuSioNaL29
-
How about Malenko's designs? You could always ask him. :)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=69808.0;attach=84012;image)
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=328715;image)
DeLuSioNaL29
;D Thanks I sent him a PM I was looking at some of his work its nice! I hope to have that many cabinets one day if my wife doesn't kick me out first ha but I think she starting to like it
-
give me dimensions and an idea of what you want, I'll try to help.
The UMK3 marquee was done cause the guy said "I like your MKII Kabinet marquee, but I want it done like UMK3" very specific!
You just want yours to say Kombat Bartop in an MK style font? What do you want in the BG? the UMK3 skulls, the MKII thunderbolt, the MK1 dragon?
-
give me dimensions and an idea of what you want, I'll try to help.
The UMK3 marquee was done cause the guy said "I like your MKII Kabinet marquee, but I want it done like UMK3" very specific!
You just want yours to say Kombat Bartop in an MK style font? What do you want in the BG? the UMK3 skulls, the MKII thunderbolt, the MK1 dragon?
Wow thanks for offering to help!, I think that's why this site is so great :cheers:
I was thinking something along the lines of it saying Kombat Bartop with MK font yes, I was also thinking MK3 Skulls for the background. Then maybe doing the player thing I posted above for control panel.
Do you think it will clash with the orange and I go a different route? :dunno
I will get you the dimensions today when I get home. Unfortunately I'm at work right now and don't remember off the top of my head.
-
I'm digging the MK theme!
-
give me dimensions and an idea of what you want, I'll try to help.
The UMK3 marquee was done cause the guy said "I like your MKII Kabinet marquee, but I want it done like UMK3" very specific!
You just want yours to say Kombat Bartop in an MK style font? What do you want in the BG? the UMK3 skulls, the MKII thunderbolt, the MK1 dragon?
Sent you PM , Thanks!
I wont lie as a kid growing up I always would go to the grocery store just to play MK lol
I'm digging the MK theme!
-
:applaud: :applaud: :applaud: Yes Malenko is the SHIZZNITTT!!!! He does great work
But my man coinops 4, do you know its at Coinops 7 now.......lets' get rid of the brick phone and get you an iphone :afro:
-
:applaud: :applaud: :applaud: Yes Malenko is the SHIZZNITTT!!!! He does great work
But my man coinops 4, do you know its at Coinops 7 now.......lets' get rid of the brick phone and get you an iphone :afro:
Ha I'm aware actually have been doing stuff with xbox since back in the day although im new to coinops and this fourm been around forever on X-S look me up same username. I just have coinops 4 set up perfectly how I liked it with 400GB with only a couple of MB left on the hard drive lol. Also I think the folder structure may have changed in 6 or 7 don't want to have to worry about it.
Soon as I get spare time this year Ill TSOP flash another box slap a hard drive in there - I have plans for another bartop (HaRuMaN's kit) since the kits on here are much better than fleabay ;D I just need to finish this first.
Hobby seems even more addictive not that im actually messing with it :P
Unfortunately if you have watched the weather parts of Dallas here and some family in Houston have been hit hard. While I work on this im also fighting to repair my fence and my roof blah oh well I always like a challenge.
-
Wherebouts in Dallas, i'm in Mckinney :cheers:
CO has gotten easier to use, there are builds called massive so you don't have to fool with anything. Just upload to box and be done with it. More games added more cores updated, and the speed and game compatability is better. There is even mouse support now for trackballs games.
It's vision/premium thats a PITA to fool with, but coinops is pretty solid and easy to add to, just more video and marquee folders added for the folks that like to have like 13,000 games :dunno
-
I think "Kombat Bartop" is a little.... plain.
so I came up with this:
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=329738;image)
(right click save as, its actual size)
Recolored the UMK3 skulls orange and red, did an MK3 style font with marble texture, gradient red and yellow stroke, and a soft white outer glow.
Also, here are the other 2 variations:
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=329740;image)
and
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=329742;image)
-
Nice going Malenko. I think that would suit this build down to the ground.
-
I think "Kombat Bartop" is a little.... plain.
so I came up with this:
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=329738;image)
(right click save as, its actual size)
Recolored the UMK3 skulls orange and red, did an MK3 style font with marble texture, gradient red and yellow stroke, and a soft white outer glow.
Also, here are the other 2 variations:
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=329740;image)
and
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=329742;image)
Good call. Mortal K- was starting to stray close to -cade territory.
-
I think "Kombat Bartop" is a little.... plain.
so I came up with this:
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=329738;image)
(right click save as, its actual size)
Recolored the UMK3 skulls orange and red, did an MK3 style font with marble texture, gradient red and yellow stroke, and a soft white outer glow.
Also, here are the other 2 variations:
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=329740;image)
and
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=329742;image)
:applaud: :cheers: - HOW DO YOU DO THIS?!
(https://p.gr-assets.com/540x540/fit/hostedimages/1395270547/8974258.gif)
TEST YOUR FIGHT! Love it!
I hate to even ask but is there a way to get the orange skulls for a background on the control panel?
You do amazing work! If you do printing I can order through you to help you with the time that it took for this ;D
-
Wherebouts in Dallas, i'm in Mckinney :cheers:
CO has gotten easier to use, there are builds called massive so you don't have to fool with anything. Just upload to box and be done with it. More games added more cores updated, and the speed and game compatability is better. There is even mouse support now for trackballs games.
It's vision/premium thats a PITA to fool with, but coinops is pretty solid and easy to add to, just more video and marquee folders added for the folks that like to have like 13,000 games :dunno
Crazy. I'm in little elm take 380 towards Denton and your there within 15 mins 8) .
I might look into that :)
-
yeah, I can do the skeleton CP.
I do not do printing, but I know a guy. Want me to get you a quote? I cant attach the CPO, its 55MBs lol
-
yeah, I can do the skeleton CP.
I do not do printing, but I know a guy. Want me to get you a quote? I cant attach the CPO, its 55MBs lol
LOL thats a hefty file. Sure PM me if you want on it, Can you upload it and send me the link?
This has started from an ok project to something that I think will come out pretty amazing in the end. I'm excited!
Thanks again :notworthy:
-
boosh
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=329750;image)
slightly reduced quality
-
This has started from an ok project to something that I think will come out pretty amazing in the end. I'm excited!
Thanks again :notworthy:
Yeah, if you're gonna do it, do it right! :cheers:
-
boosh
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=136713.0;attach=329750;image)
slightly reduced quality
Its like Christmas, I feel a joygasm coming on.
(http://i556.photobucket.com/albums/ss6/RhysTrev/Animated%20Images/c4c1735ad7654028e01c59c2ed8e2608.gif)
-
don't forget to change your coinops background and music to go with with your theme.
Yeah im right next to 380, played a little indoor soccer over at bluesky...
-
don't forget to change your coinops background and music to go with with your theme.
Yeah im right next to 380, played a little indoor soccer over at bluesky...
Interesting the one on 423? I pass that everyday going to work. Hate the traffic in that area.
I will indeed at least update the background on CoinOPS, Tonight though I'm ordering the last few parts - Component to VGA, Speaker Amp and plexi off eBay more than likely.
Once I find out about the quote on vinyl print ill probably act on that depending on which is more affordable vs gameongraphix ;)
-
Yep the one next to the lake.
go with Malenko's guy for printing I just got an order done and it looks awesome. He is awesome to work with.
Why ebay, plexi can be found at home depot,
these work well with the xbox....
(http://i00.i.aliimg.com/wsphoto/v0/527801884_1/-font-b-RGB-b-font-TO-VGA-CGA-TO-VGA-font-b-converter-b-font.jpg) , ebay
These are cheap andwork well too, ebay
(http://www.micmc.com/media/catalog/product/cache/1/image/800x800/9df78eab33525d08d6e5fb8d27136e95/a/m/am016-3.jpg)
-
Yep the one next to the lake.
go with Malenko's guy for printing I just got an order done and it looks awesome. He is awesome to work with.
Why ebay, plexi can be found at home depot,
these work well with the xbox....
(http://i00.i.aliimg.com/wsphoto/v0/527801884_1/-font-b-RGB-b-font-TO-VGA-CGA-TO-VGA-font-b-converter-b-font.jpg) , ebay
These are cheap andwork well too, ebay
(http://www.micmc.com/media/catalog/product/cache/1/image/800x800/9df78eab33525d08d6e5fb8d27136e95/a/m/am016-3.jpg)
Ok I didnt even think of Home Depot lol I was going to go to Hobby Lobby or eBay for Plexi
Anyhow for the amp found similar to your post this one
http://www.ebay.com/itm/Mini-2CH-Hi-Fi-Stereo-Amplifier-Car-Motorcycle-Home-AMP-CD-DVD-MP3-Speaker-WELL-/310840480118?pt=LH_DefaultDomain_0&hash=item485f895176 (http://www.ebay.com/itm/Mini-2CH-Hi-Fi-Stereo-Amplifier-Car-Motorcycle-Home-AMP-CD-DVD-MP3-Speaker-WELL-/310840480118?pt=LH_DefaultDomain_0&hash=item485f895176)
and the componet to vga I cant seem to find that one what about this :dunno
http://www.ebay.com/itm/1080P-5-RCA-RGB-YPbPr-Component-to-VGA-Audio-Video-Converter-for-PS3-2-Xbox-360-/331504704796?pt=LH_DefaultDomain_0&hash=item4d2f385d1c (http://www.ebay.com/itm/1080P-5-RCA-RGB-YPbPr-Component-to-VGA-Audio-Video-Converter-for-PS3-2-Xbox-360-/331504704796?pt=LH_DefaultDomain_0&hash=item4d2f385d1c)
-
don't forget to change your coinops background and music to go with with your theme.
Not sure if you'll like this but ...
(http://www.youtube.com/watch?v=DkwLWWPU3MI#ws)
-
Heads up on that Kinter amp, I've ordered one in the past and it's cheap but doesn't come with a power supply. See the comments on Amazon.
http://www.amazon.com/Kinter-Digital-Audio-Power-Amplifier/dp/B007TUSXEY/ref=sr_1_1?ie=UTF8&qid=1433366168&sr=8-1&keywords=kinter (http://www.amazon.com/Kinter-Digital-Audio-Power-Amplifier/dp/B007TUSXEY/ref=sr_1_1?ie=UTF8&qid=1433366168&sr=8-1&keywords=kinter)
The one below is a good alternative that isn't that much more expensive and includes a power supply:
http://www.amazon.com/Lepai-LP-2020A-Tripath-Class-T-Amplifier/dp/B0049P6OTI/ref=sr_1_sc_1?ie=UTF8&qid=1433366234&sr=8-1-spell&keywords=lei+pai+amp (http://www.amazon.com/Lepai-LP-2020A-Tripath-Class-T-Amplifier/dp/B0049P6OTI/ref=sr_1_sc_1?ie=UTF8&qid=1433366234&sr=8-1-spell&keywords=lei+pai+amp)
-
If you go below to the "Frequently Bought Together" link, you can get the necessary power supply for less than the Lepai. Just sayin'.
-
True, the Kinter is about $10 cheaper all told with the psu but the Lepai has a little more power. Either one would be fine, just don't order the Kinter and not a power supply, pain in the a**.
-
True, the Kinter is about $10 cheaper all told with the psu but the Lepai has a little more power. Either one would be fine, just don't order the Kinter and not a power supply, pain in the a**.
I agree with you there. I would buy the Lepai myself if the price was a bit closer, but I'm not using these machines for jukeboxes. It's more than adequate for a bar top.
-
Yep the one next to the lake.
go with Malenko's guy for printing I just got an order done and it looks awesome. He is awesome to work with.
Why ebay, plexi can be found at home depot,
these work well with the xbox....
(http://i00.i.aliimg.com/wsphoto/v0/527801884_1/-font-b-RGB-b-font-TO-VGA-CGA-TO-VGA-font-b-converter-b-font.jpg) , ebay
These are cheap andwork well too, ebay
(http://www.micmc.com/media/catalog/product/cache/1/image/800x800/9df78eab33525d08d6e5fb8d27136e95/a/m/am016-3.jpg)
Ok I didnt even think of Home Depot lol I was going to go to Hobby Lobby or eBay for Plexi
Anyhow for the amp found similar to your post this one
http://www.ebay.com/itm/Mini-2CH-Hi-Fi-Stereo-Amplifier-Car-Motorcycle-Home-AMP-CD-DVD-MP3-Speaker-WELL-/310840480118?pt=LH_DefaultDomain_0&hash=item485f895176 (http://www.ebay.com/itm/Mini-2CH-Hi-Fi-Stereo-Amplifier-Car-Motorcycle-Home-AMP-CD-DVD-MP3-Speaker-WELL-/310840480118?pt=LH_DefaultDomain_0&hash=item485f895176)
and the componet to vga I cant seem to find that one what about this :dunno
http://www.ebay.com/itm/1080P-5-RCA-RGB-YPbPr-Component-to-VGA-Audio-Video-Converter-for-PS3-2-Xbox-360-/331504704796?pt=LH_DefaultDomain_0&hash=item4d2f385d1c (http://www.ebay.com/itm/1080P-5-RCA-RGB-YPbPr-Component-to-VGA-Audio-Video-Converter-for-PS3-2-Xbox-360-/331504704796?pt=LH_DefaultDomain_0&hash=item4d2f385d1c)
Here ya go...
http://www.ebay.com/itm/Arcade-game-RGB-CGA-EGA-YUV-to-VGA-HD-video-converter-board-1-VGA-output-/250893074846?pt=LH_DefaultDomain_0&hash=item3a6a64819e (http://www.ebay.com/itm/Arcade-game-RGB-CGA-EGA-YUV-to-VGA-HD-video-converter-board-1-VGA-output-/250893074846?pt=LH_DefaultDomain_0&hash=item3a6a64819e)
I've built a few bartops and as you know you are limited with space, and that bulky case cant be mounted. However you can pull the board out of that case as use it like that. I have had a few ground issues with that brand, the one i linked you too has a nice 720p res with no ground noise lines. I like using just the boards as you can use pcb feet tp mount it nicely inside of the bartop.
The amp you chose is the kinter amp, look at the name on the top.....
Heads up on that Kinter amp, I've ordered one in the past and it's cheap but doesn't come with a power supply. See the comments on Amazon.
http://www.amazon.com/Kinter-Digital-Audio-Power-Amplifier/dp/B007TUSXEY/ref=sr_1_1?ie=UTF8&qid=1433366168&sr=8-1&keywords=kinter (http://www.amazon.com/Kinter-Digital-Audio-Power-Amplifier/dp/B007TUSXEY/ref=sr_1_1?ie=UTF8&qid=1433366168&sr=8-1&keywords=kinter)
The one below is a good alternative that isn't that much more expensive and includes a power supply:
http://www.amazon.com/Lepai-LP-2020A-Tripath-Class-T-Amplifier/dp/B0049P6OTI/ref=sr_1_sc_1?ie=UTF8&qid=1433366234&sr=8-1-spell&keywords=lei+pai+amp (http://www.amazon.com/Lepai-LP-2020A-Tripath-Class-T-Amplifier/dp/B0049P6OTI/ref=sr_1_sc_1?ie=UTF8&qid=1433366234&sr=8-1-spell&keywords=lei+pai+amp)
I bought a Lepai once and it had a nasty hum, i've bought tons of kinters and had no problem. My question to you is for a bartop, what good does a power supply do ya, where ya gonna plug it in? All you need is these 2 items here.
(http://thumbs2.ebaystatic.com/d/l225/m/mU-6s80K0fLeddiskwW05Ew.jpg) ebay super cheap
(https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcSBg0X9aWeyfZeu9-tHje8Xrkz7m2V8GrlZXabLw9ZI0Mlx1peWbg)
Plug that into your xbox psu, attach the pig tail to 12v and plug pigtail into the kinter and done......
Kinters put out plenty of power for a bartop, and its plenty loud, its a bartop not a dj platform.
-
Kinters put out plenty of power for a bartop, and its plenty loud, its a bartop not a dj platform.
Testify, Brother Rodney!
-
I bought a Lepai once and it had a nasty hum, i've bought tons of kinters and had no problem. My question to you is for a bartop, what good does a power supply do ya, where ya gonna plug it in? All you need is these 2 items here.
Kinters put out plenty of power for a bartop, and its plenty loud, its a bartop not a dj platform.
No hum problems with the Lepai I have. My point wasn't that you can't add power to the Kinter, just pointing out that it doesn't come with power which isn't immediately apparent to someone ordering for the first time. Also not all bartops are devoid of power strips, I have a small 3 plug in mine. The Lepai's advantage is that it's a one and done order but either work perfectly fine. If he's running power to it and space is of concern then the DROK mini amps are small, cheap and work well too, no bass/treble controls though.
http://www.amazon.com/gp/product/B00C4MT274?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s02 (http://www.amazon.com/gp/product/B00C4MT274?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s02)
-
I bought a Lepai once and it had a nasty hum, i've bought tons of kinters and had no problem. My question to you is for a bartop, what good does a power supply do ya, where ya gonna plug it in? All you need is these 2 items here.
Kinters put out plenty of power for a bartop, and its plenty loud, its a bartop not a dj platform.
No hum problems with the Lepai I have. My point wasn't that you can't add power to the Kinter, just pointing out that it doesn't come with power which isn't immediately apparent to someone ordering for the first time. Also not all bartops are devoid of power strips, I have a small 3 plug in mine. The Lepai's advantage is that it's a one and done order but either work perfectly fine. If he's running power to it and space is of concern then the DROK mini amps are small, cheap and work well too, no bass/treble controls though.
http://www.amazon.com/gp/product/B00C4MT274?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s02 (http://www.amazon.com/gp/product/B00C4MT274?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s02)
Yeah, I'm going to go DROK's for bartops from now on. Easy to power, small, not too fancy...
-
I bought a Lepai once and it had a nasty hum, i've bought tons of kinters and had no problem. My question to you is for a bartop, what good does a power supply do ya, where ya gonna plug it in? All you need is these 2 items here.
Kinters put out plenty of power for a bartop, and its plenty loud, its a bartop not a dj platform.
No hum problems with the Lepai I have. My point wasn't that you can't add power to the Kinter, just pointing out that it doesn't come with power which isn't immediately apparent to someone ordering for the first time. Also not all bartops are devoid of power strips, I have a small 3 plug in mine. The Lepai's advantage is that it's a one and done order but either work perfectly fine. If he's running power to it and space is of concern then the DROK mini amps are small, cheap and work well too, no bass/treble controls though.
http://www.amazon.com/gp/product/B00C4MT274?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s02 (http://www.amazon.com/gp/product/B00C4MT274?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s02)
Ah, ok i'm following you now, i was just offering a different solution to the power problem. I agree its not devoid, however i've had no room for strips in my builds, cause i like to attach everything to the bartop and not just lay it in there. I also use relays to delay the sound and video, to bypass the Xbox intro part, so plugs just get in the way. I only softmod, and have no idea how to modify the bios to make it disappear. I guess i just had a bad Lepai, but aren't those a bit bigger than than the Kinters.
You are right about the DROK's, here's one with RCA's at 20W
http://www.amazon.com/DROK-12~15V-Channel-Amplifier-Motorcycle/dp/B00C35TBSM (http://www.amazon.com/DROK-12~15V-Channel-Amplifier-Motorcycle/dp/B00C35TBSM)
-
sorry to interrupt the amplifier thread with a project question, but need any other art?
-
sorry to interrupt the amplifier thread with a project question, but need any other art?
Not unless we can do the MK Dragon for sides but I think I might need to get you the dimensions. Not a full side but just something there because I do not have t-molding. Malenko did your guy ever get you a quote on the other? Just wondering. Thanks for all the help man! ;D
I bought a Lepai once and it had a nasty hum, i've bought tons of kinters and had no problem. My question to you is for a bartop, what good does a power supply do ya, where ya gonna plug it in? All you need is these 2 items here.
Kinters put out plenty of power for a bartop, and its plenty loud, its a bartop not a dj platform.
No hum problems with the Lepai I have. My point wasn't that you can't add power to the Kinter, just pointing out that it doesn't come with power which isn't immediately apparent to someone ordering for the first time. Also not all bartops are devoid of power strips, I have a small 3 plug in mine. The Lepai's advantage is that it's a one and done order but either work perfectly fine. If he's running power to it and space is of concern then the DROK mini amps are small, cheap and work well too, no bass/treble controls though.
http://www.amazon.com/gp/product/B00C4MT274?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s02 (http://www.amazon.com/gp/product/B00C4MT274?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s02)
Yeah, I'm going to go DROK's for bartops from now on. Easy to power, small, not too fancy...
I purchased the Kinter last night tonight Ill get to ordering the VGA adapter and Plexi ill pickup payday (Friday) @ Home Depot
-
$41 shipped on the art
-
$41 shipped on the art
PM sent , thanks!
-
This VGA converter should work too (has only one VGA output as opposed to the two above which is overkill) and composite inputs for the Xbox. I've ordered from this seller before. It comes relatively quickly considering it's coming from China. Comes with power cable as well (you can connect this to +5v (red wire on molex) on the Xbox power supply. $21 shipped.
http://www.ebay.com/itm/321680159023 (http://www.ebay.com/itm/321680159023)
DeLuSioNaL29
-
This VGA converter should work too (has only one VGA output as opposed to the two above which is overkill) and composite inputs for the Xbox. I've ordered from this seller before. It comes relatively quickly considering it's coming from China. Comes with power cable as well (you can connect this to +5v (red wire on molex) on the Xbox power supply. $21 shipped.
http://www.ebay.com/itm/321680159023 (http://www.ebay.com/itm/321680159023)
DeLuSioNaL29
Yeah that's the same one i was referring to, some come with dual ports, however out of the U.S. the price is pretty much the same.
You are right though the ones from overseas work well are are cheaper if your willing to wait it.
-
Small update
Artwork - Soon, Working with Malenko (Great guy)
VGA Adapter - Purchased - awaiting ship & delivery
PCB Feet - Purchased - Bought some on eBay for the VGA Adapter (Ill rig something up on xbox mainboard psu and drive)
Kinter amplifer - Purchased - awaiting ship & delivery
Plexi ill grab tomorrow @ home depot or lowes
This VGA converter should work too (has only one VGA output as opposed to the two above which is overkill) and composite inputs for the Xbox. I've ordered from this seller before. It comes relatively quickly considering it's coming from China. Comes with power cable as well (you can connect this to +5v (red wire on molex) on the Xbox power supply. $21 shipped.
http://www.ebay.com/itm/321680159023 (http://www.ebay.com/itm/321680159023)
DeLuSioNaL29
That's the one I got thanks! , Also a thanks to everyone else who has been posting :cheers:
-
Nice job men :applaud:
-
:cry:
What a week.
So I got in the feet for boards, apparently someone stole my Kinter amp so I called Amazon and they put in a research ticket and hopefully will work on getting me a credit.
Last night though I had everything connected VGA adapter running off molex and everything looked great unfortunately I do not have pictures because I was so stressed with what happened next.
I moved it to another room and then went to power nothing happend. :cry: Everything was secured and nothing that I saw could have created a short. I took out the PSU and Mobo and looked over everything no broken solder joints no burnt traces no capacitor issues. Test the psu and it works fine.
Mobo will do nothing though :dizzy: so now I am lost. :banghead:
I think I will keep the same setup but get rid of the box and move over to ordering a raspberry pi model 2 this next week or two.
Just wanted to give an update its not dead but defiantly on a temporary halt.
Quick question does anyone have experiance with the pi2 and MK running on Mame through retropie? Speed/Sound issue?
-
arent you close by, maybe i can fix it for you?
-
:cry:
What a week.
So I got in the feet for boards, apparently someone stole my Kinter amp so I called Amazon and they put in a research ticket and hopefully will work on getting me a credit.
Last night though I had everything connected VGA adapter running off molex and everything looked great unfortunately I do not have pictures because I was so stressed with what happened next.
I moved it to another room and then went to power nothing happend. :cry: Everything was secured and nothing that I saw could have created a short. I took out the PSU and Mobo and looked over everything no broken solder joints no burnt traces no capacitor issues. Test the psu and it works fine.
Mobo will do nothing though :dizzy: so now I am lost. :banghead:
I think I will keep the same setup but get rid of the box and move over to ordering a raspberry pi model 2 this next week or two.
Just wanted to give an update its not dead but defiantly on a temporary halt.
Quick question does anyone have experiance with the pi2 and MK running on Mame through retropie? Speed/Sound issue?
So you think it's going to be EASIER moving to a Pi???
-
arent you close by, maybe i can fix it for you?
Might have to take you up on that offer sometime, any experience with xbox mobo? Definitely wouldn't mind the help sometime. Also I cant find my meter in the garage so I dont know if it may actually be the power supply any tricks to know which one? I press power it does nothing on the power supply when it plugged in after I remove the cord I can hear it "discharge" like normal
:cry:
What a week.
So I got in the feet for boards, apparently someone stole my Kinter amp so I called Amazon and they put in a research ticket and hopefully will work on getting me a credit.
Last night though I had everything connected VGA adapter running off molex and everything looked great unfortunately I do not have pictures because I was so stressed with what happened next.
I moved it to another room and then went to power nothing happend. :cry: Everything was secured and nothing that I saw could have created a short. I took out the PSU and Mobo and looked over everything no broken solder joints no burnt traces no capacitor issues. Test the psu and it works fine.
Mobo will do nothing though :dizzy: so now I am lost. :banghead:
I think I will keep the same setup but get rid of the box and move over to ordering a raspberry pi model 2 this next week or two.
Just wanted to give an update its not dead but defiantly on a temporary halt.
Quick question does anyone have experiance with the pi2 and MK running on Mame through retropie? Speed/Sound issue?
So you think it's going to be EASIER moving to a Pi???
Pi2 seems to run most games I like and flashing retro pie it seems fairly simple and only thing it looks like I might have to do is a usb powered hub to run two kades, just a thought if I don't figure this out sometime within next week or so I might , any bad experiences or something with their latest build?
I found a xbox $10 local I'm going to pick up hopefully that will work
-
printer said your art goes out today. :cheers:
-
printer said your art goes out today. :cheers:
Thanks!
-
Art work came in looks great Ill post some pictures soon. :cheers:
Sad note the cheap xbox on flea bay for $19 that said was just a DVD drive problem wasnt the only issue. I took everything apart and seems some did a failed tsop mod. Anyhow I fixed the DVD drive just adjusted lense. I wanted to tsop so I could just swap drives since I don't have an extra xbox or molex to hotswap.
Regardless today I was excited about art work so I am updating coin ups and will use the stock 8gb I can put the games I want with the locks off.
If there a solder wizard nearby dallas I welcome you to try to fix this persons bad tsop attempt. Egh. Lol pics soon
-
Rablack is an Xbox guru. Remember you have to trim the marquee to fit
-
Rablack is an Xbox guru. Remember you have to trim the marquee to fit
Yes I will trim it still cant believe how great it looks ill post after I put it on this weekend. :)
arent you close by, maybe i can fix it for you?
like 5-10 mins away I think from what you said? Wanna give the old xbox 1.0 a look over lol?
-
post some pics
-
post some pics
Okay no problemo
1.0 Wont boot (original that just randomly stopped working)
Mobo
(http://s3.postimg.org/3rutvbzxv/1_0_mobo.jpg)
(http://s8.postimg.org/kk2dnr2h1/1_0_Mobo_2.jpg)
PSU
(http://s12.postimg.org/doi4yo8u5/1_0_psu.jpg)
(http://s27.postimg.org/it4vthb5v/1_0_psua.jpg)
(http://s22.postimg.org/f0pjppzdd/1_0_psu_2.jpg)
2nd console is a 1.2 (Was going to do a TSOP until I opened it up an saw this was done by previous owner ::) - it boots fine. Im currently FTP'ing Coinops 6 lite running a softmod on it.
(http://s12.postimg.org/x1e3224sd/1_2_damage.jpg)
(http://s3.postimg.org/i02w2y65v/1_2_mobo.jpg)
(http://s2.postimg.org/klxjp6uyh/1_2_lifted_trace.jpg)
Ive done several consoles and installed chips on the xbox even the enigma. if you can find any docs on that, lol.
But in all honesty I dont even want to try to fix that tsop.
I dont know if they laid down an iron on it that was super high wattage or what? :dizzy: Amazingly though it has a factory TSOP bios on it so either they put it back to stock and ripped out wires or something.
Any ideas on the 1.0?
-
not offhand, i'd have to take a peek and tinker with it, if its just dead, i would look at psu first. Its a 1.0 so that box is fairly old and the PSU's normally blip out first without warning.
-
Maybe try bridging the alternate pins with wire for the TSOP?
Enigma eh? Heres some OLD pix of my first ever XBOX modchip install:
(http://home.comcast.net/~llinrac/enigmah1.jpg)
(http://home.comcast.net/~llinrac/enigmah2.jpg)
Lookin forward to the install pix of the art, looks like you have a pretty good camera!
-
You could try a conductive pen to try to bridge the TSOP points.
-
Maybe try bridging the alternate pins with wire for the TSOP?
Enigma eh? Heres some OLD pix of my first ever XBOX modchip install:
(http://home.comcast.net/~llinrac/enigmah1.jpg)
(http://home.comcast.net/~llinrac/enigmah2.jpg)
Lookin forward to the install pix of the art, looks like you have a pretty good camera!
Woah! Nice install on that 21 wire all green wires would drive me crazy lol! Ill have to see if I can dig mine up or find a cached version on xbox-scene.
Heres some of the control panel the pictures dont do a justice and looks a little washed and shows a white line thats not there. (camera is my Galaxy Note 4 off my phone)
(http://s27.postimg.org/r669dw58j/20150621_203105.jpg)
(http://s3.postimg.org/57xf1lj9f/20150621_213857.jpg)
I like it, Thanks for the help on the artwork Malenko. :cheers:
You could try a conductive pen to try to bridge the TSOP points.
I do not have a conductive pen, I thought about using a fiberglass pen I have and running it off the trace there was a few attempts it seems at alternate locations as well unfortunately. For now I'm fine with it being a softmod.
When I get some more time I might fix it though.
not offhand, i'd have to take a peek and tinker with it, if its just dead, i would look at psu first. Its a 1.0 so that box is fairly old and the PSU's normally blip out first without warning.
Yeah I may just buy a extra power supply off fleabay it has an adapter for 1.0 to 1.6 , I need to find me some chips with cromwell bios on them as well for a future project, double memory maybe.
-
conductive pens can be found at your local radio shack, they seem to have went down in price since i last bought one they are only 12.00 vs 20.00.
Yeah i would hit up the electronics goodwill in downtown dallas, you can get working xboxes with sticks and all for 20.00.
IMHO, i use softmods only and have no issues, i dont fool with the bios, and the list of lockable drives is infinite and you can get 160gb drives for 10-12 bucks off ebay, which is plenty for coinops massive builds and premium.
you seem to be versed in the xbox lingo, so i'm sure you will get it up and running like you want eventually. keep up the good work though, let me know if you need anything, i have all sorts of goodies for xbox bartop builds......
i got some nice 3" speakers and grills, 3 prong plugs, a couple HD xbox video plugs, electrical outlets with LED, etc....
your local, so i may be able to help you out if you need it....... :cheers:
-
There's a guy in Quebec developing a new modchip for the xbox , he has a thread over at assembler games (http://assemblergames.com/l/threads/wip-new-modchip-coming-in.52381/) in case you're interested.
-
Well I thought I would update you guys since its been awhile, Unfortunately between a ton of things going on at work and mom getting sick I haven't had alot of free time but here is a picture of it up and running.
Still need to figure out the following
A Marquee light (something like the led ones maybe, Any suggestions? )
Throw on the Plexi and Marquee
Split the monitor into the xbox power supply somehow (Can I just splice the power cable or think thats a bad idea?)
(http://s12.postimg.org/poi2zibb1/20150628_231122_1.jpg)
Also I found a 12v power supply for kinter and I was thinking of just cutting the cord and using the molex power, Dumb question but since the cables are same color how would I know -,+.
There's a guy in Quebec developing a new modchip for the xbox , he has a thread over at assembler games (http://assemblergames.com/l/threads/wip-new-modchip-coming-in.52381/) in case you're interested.
Looks neat! I miss my old chipped boxes and multibios
conductive pens can be found at your local radio shack, they seem to have went down in price since i last bought one they are only 12.00 vs 20.00.
Yeah i would hit up the electronics goodwill in downtown dallas, you can get working xboxes with sticks and all for 20.00.
IMHO, i use softmods only and have no issues, i dont fool with the bios, and the list of lockable drives is infinite and you can get 160gb drives for 10-12 bucks off ebay, which is plenty for coinops massive builds and premium.
you seem to be versed in the xbox lingo, so i'm sure you will get it up and running like you want eventually. keep up the good work though, let me know if you need anything, i have all sorts of goodies for xbox bartop builds......
i got some nice 3" speakers and grills, 3 prong plugs, a couple HD xbox video plugs, electrical outlets with LED, etc....
your local, so i may be able to help you out if you need it....... :cheers:
I have some cheap china xbox 720p cables but they seem to be picking up noise sometimes in the image but with limited space I dont know how to fix that?
Also any suggestions on getting the Monitor and xbox power cord connected together?
-
Marquee lighting 12v
(http://thumbs3.ebaystatic.com/d/l225/m/m9NLVxJ03QG7WsrVaYw1RlQ.jpg)
Cut the cables and just tie into a euro strip, 110 in and 110 out to monitor and xbox. If your gonna use the strip get you some ferrules(bottom photo)
(http://allelcdn.upshotcommerce.com//mas_assets/cache/image/f/8/8/3976.Jpg)
(http://previews.123rf.com/images/sanguis/sanguis1104/sanguis110400030/9378587-wire-end-ferrules-Stock-Photo.jpg)
If you decased the xbox that noise is because you didnt ground the metal prongs on the video input on the xbox. There are 2 little pieces of metal with a dimple, one on each side of the xbox, solder a wire to each and connect that to ground. Most folks don't know the when you put the top case on, the metal in the top part touches these metal pieces which grounds the video.
-
Marquee lighting 12v
(http://thumbs3.ebaystatic.com/d/l225/m/m9NLVxJ03QG7WsrVaYw1RlQ.jpg)
Cut the cables and just tie into a euro strip, 110 in and 110 out to monitor and xbox. If your gonna use the strip get you some ferrules(bottom photo)
(http://allelcdn.upshotcommerce.com//mas_assets/cache/image/f/8/8/3976.Jpg)
(http://previews.123rf.com/images/sanguis/sanguis1104/sanguis110400030/9378587-wire-end-ferrules-Stock-Photo.jpg)
If you decased the xbox that noise is because you didnt ground the metal prongs on the video input on the xbox. There are 2 little pieces of metal with a dimple, one on each side of the xbox, solder a wire to each and connect that to ground. Most folks don't know the when you put the top case on, the metal in the top part touches these metal pieces which grounds the video.
On the Marquee lighting I was thinking this one like in your picture correct?
http://www.ebay.com/itm/12V-5m-SMD-3528-White-Light-Epoxy-Waterproof-300-LED-Roll-Felxible-Light-Strip-/391182540884?pt=LH_DefaultDomain_0&hash=item5b144be054 (http://www.ebay.com/itm/12V-5m-SMD-3528-White-Light-Epoxy-Waterproof-300-LED-Roll-Felxible-Light-Strip-/391182540884?pt=LH_DefaultDomain_0&hash=item5b144be054)
The Xbox is decased are these the points you are referring to?
(http://s13.postimg.org/610r2ojqf/image.jpg)
Euro strip - I personally don't have any experience can you draw something simple to show how I would wire a 3 prong monitor cable and the xbox 2 prong into a eurostrip if you don't mind? sorry just trying to figure it out.
-
yep those are the correct lights.
yes that's the ground video points, you see how they touch the metal casing, it helps to eliminate the noise in the video.
(http://www.maximusdvd.com/mytwinturbo/custom/working-in-garage-5_files/P9200042.jpg)
3 prong white black green on one side (110v source)
3 prong white black green to monitor on the other side
Jump white black from 110v like photo, then attach white/black to xbox.
done....make sure you use the appropriate gauge wire to jump.
-
Update!
98% done I just need to do some touch up and redo the marquee. I had to put it on hold due to some great news. I'm going to be a dad ;D
(http://s21.postimg.org/i6ztxcxgn/Screenshot_2015_10_05_17_31_25.png)
Sorry for the LQ pic I'll post more later
I will say the fit of this was hard to do obviously my next will be better. I'm just glad to have made this progress. Hopefully I'll be back when I get more time between being a dad and everything else. Im debating a full size tmnt style or another bartop.
-
congrats on the baby! :cheers:
Cab turned out really good for a first try, I was happy I could help even if it wasnt much.
-
congrats on the baby! :cheers:
Cab turned out really good for a first try, I was happy I could help even if it wasnt much.
Thanks definitely you were a help, still like the control panel artwork the most. Rablack97 helped with ground issue too and a ton of other people too.
Here's another picture should have loaded MK up. Need to fix the bezel and I'll take more pictures .
(http://s15.postimg.org/tz4nnotiz/20151004_175039.jpg)