Author Topic: hand held atari 2600 (Read 1280 times)

Pipercub · « **on:** July 15, 2003, 12:43:24 am »

When I was 12 and trying to sneak my 2600 to school I came up with a solution. I pulled the board out of my older 2600, installed it into a Radioshack project box that also held the batteries. My screen was a pocket Sony TV (I think it was the first one, tube type) with about a 1 inch screen. This was mounted inside the case so that the joystick ports and the cartidge slot were on the front with the screen. All in all it was pretty small, and I removed the carts from their cases so I could carry more. Not bad for 1982.

But this fellow has done what I always wanted to do, check this out!

http://www.classicgaming.com/vcsp/VCSpStory1.htm

SirPeale · « **Reply #1 on:** July 16, 2003, 10:06:49 am »

Yeah, this has been around for a while. Check out his other projects too.

Hoagie_one · « **Reply #2 on:** July 16, 2003, 06:13:59 pm »

he did a snes and a ps1


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: hand held atari 2600 (Read 1280 times)

Pipercub

hand held atari 2600

SirPeale

Re:hand held atari 2600

Hoagie_one

Re:hand held atari 2600