Author Topic: Primal Rage Jamma Audio (Read 2196 times)

archanjel · « **on:** August 12, 2009, 02:02:33 pm »

I have a Primal Rage PCB that I want to put in a standard Jamma cabinet. Everything works when hooked up except the sound obviously since it was cabinet specific. The board has no ribbon cables or wiring and I have to make some but i dont know the correct wiring from the sound board to get the sound to work with the standard Jamma harness.

Has anyone done this or is familiar with it? A picture of a wired board would be even better if it exists.

Thanks...

Beretta · « **Reply #1 on:** August 12, 2009, 05:20:24 pm »

this will probably help.. manuals: http://arcarc.xmission.com/PDF_Arcade_Atari_Kee/Primal_Rage/


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Primal Rage Jamma Audio (Read 2196 times)

archanjel

Primal Rage Jamma Audio

Beretta

Re: Primal Rage Jamma Audio