Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Ampliphone help  (Read 1200 times)

0 Members and 1 Guest are viewing this topic.

shilmover

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 533
  • Last login:September 25, 2018, 12:36:59 am
Ampliphone help
« on: May 05, 2009, 12:11:34 am »
About 2 years ago, I got the amp in my Star Wars working... Then, about 6 months ago, the screen went really bright (I could see all the interconnect vector lines).  About 2 months ago, it stopped.  Game plays blind, but nothing on the screen.

Some info:
- There is no neck glow
- I do not hear the monitor start up
- The LED on the small board with the Fly is on
- The LED on the large board comes on, then turns off.

It has been so long since I fixed it that I am back to square one.  Suggestions?
My projects...

Finished:  Stargate (only 'cause I got it that way)
In progress:  Tron, 48-in-1 for School Auction, DKJr (currently a 60-in-1), Millipede, MAME System

qrz

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1056
  • Last login:October 24, 2015, 03:04:15 pm
  • wrangling electrons since 1978
Re: Ampliphone help
« Reply #1 on: May 07, 2009, 10:38:06 pm »
check fuses ( f3,4)  /to-3 xistor outputs/molex connectors ( loose)


clean ! game manual here (sans monitor )    http://www.crazykong.com/manuals/StarWars.man.pdf
PM for monitor   2.7meg zip file


qrz