Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: i need to replace trimmer pot on neck board please help  (Read 1575 times)

0 Members and 1 Guest are viewing this topic.

pickle me stupid

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • Last login:February 24, 2009, 01:38:46 am
i need to replace trimmer pot on neck board please help
« on: February 23, 2009, 04:59:13 am »
i have a wells gardner k7400 with to much blue
the trimmer does nothing and when i tested it the readings did not much up with other pots

1k 109m are the numbers on the trimmer
i do not know what the part is called when purchasing it
does anyone know the part number from mouser electronics or any other parts store

thank you
Logged
yowzers

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: i need to replace trimmer pot on neck board please help
« Reply #1 on: February 23, 2009, 11:37:51 am »
Bob Roberts has plenty of trimmer pots on his site.
Logged

pickle me stupid

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • Last login:February 24, 2009, 01:38:46 am
Re: i need to replace trimmer pot on neck board please help
« Reply #2 on: February 24, 2009, 01:17:35 am »
thanks for the help it gave me an idea of what i need
i was hoping to order it from mouser because i needed to order two thyristors from them, for a pinball machine
wanted to save  money on shipping
Logged
yowzers

pickle me stupid

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 13
  • Last login:February 24, 2009, 01:38:46 am
Re: i need to replace trimmer pot on neck board please help
« Reply #3 on: February 24, 2009, 01:38:46 am »
i found it
i finally typed the right numbers into the WG web site, and found a parts list
 the neck board was a p719
thank you for your help
sorry i was not to be more clear on what the id numbers were and on what i needed
Logged
yowzers
Pages: [1]
  
Go Up
« previous next »