Neo Geo Arcade monitor (Power question)

[tomdotcom]

I'm in the middle of converting an old neo geo cab into a mame cab and I have a quick question about how to power the arcade monitor.

Can I just run the power wires from the monitor down into the monitor transformer box and then out to the female plug on the back of the cab and then from there just plug in a power cord to house power or a powerbar?

==edit (I will be removing the original main power supply entirely) edit==

[Malenko]

you don't need the power supply for the monitor but you DO NEED the isolation transformer.

[tomdotcom]

Ok so my power wires from the monitor do go to the transformer first, and then from there can I just route them through to the female power plug on the back of the cab? And then from there just use a standard power cable to the house power outlet?

[johnnybleu]

Yup.
The monitor uses regular 120V AC current (well, in North America). The only thing needed is the isolation transformer. Other than that, you're good to go.

[tomdotcom]

Thx johnny! I actually pulled out all the extra wires and the old power supply last night. So all I have left is the wires I need for the moniter power. Spent a good couple hours pulling it apart and cleaning it up to get ready for the jpac and pc. Thx for the needed assistance..I don't want to start a fire or kill myself haha..

I'm also going to need to power the coin door lights, was thinking of just using a 12v battery pack. Could I just use a 12v power plugin and splice it into onto the coin door light power wires? Any certain amperage I should use if that would work?

[Kevin Mullins]

I'm also going to need to power the coin door lights, was thinking of just using a 12v battery pack. Could I just use a 12v power plugin and splice it into onto the coin door light power wires? Any certain amperage I should use if that would work?

You have a power supply in that PC right?
12v and 5v at the ready.....

[tomdotcom]

Yep sure do haha..it should work fine..I'm just waiting on the PC to be shipped here with the JPAC and then I have mame machine #2! woot woot..thx so much guys..hope this all pans out..my first mame cab just used a 27" TV so it was really straightforward..this one's a little more complicated..but alot more fun too!

[payment_due]

I'm in the middle of converting an old neo geo cab into a mame cab

[tomdotcom]

Oh boo hoo..mines a hunk..far from a classic