Main > Main Forum

Sanity Check

<< < (3/4) > >>

lordbah:
Spinner works now. The cable coming from it has two rows of pins, but the connector which turns that into USB only has one row of sockets. I just had to move it from the bottom row of pins to the top row. No idea why they don't match ...

Still can't get the trackball working right.

The joysticks work, but when I release one after a move and it snaps back to center, it transmits a motion in the opposite direction. Have to figure out where and how to tune that.

Ginsu Victim:
If you're using U360s, then the snapback problem might be helped by increasing the deadzone in your maps. Are you using the default springs or the hard springs?

mr_doles:

--- Quote from: DaveMMR on November 24, 2008, 10:43:43 pm ---Actually, with the u-trak, he'd have even more available space since it doesn't require a mounting plate.  Six inches deep would be a tight depth with one (assuming 3"). 

You just can't play Golden Tee.   ;)

--- End quote ---

Why can't he play golden tee?  Is it a space issue or an issue with the game and the u-trak?  I am looking at trackballs now and want to make sure I can play golden tee.  I know just because I am asking it is a joke on the space and I look like an idiot  :banghead: but better safe then sorry!

Ginsu Victim:
Golden Tee requires a lot of depth in the CP so you can slap the ball hard. A small CP equals broken fingers.

nuka1195:
Use your thumbs on each side of the trackball. works great, no broken fingers or dislodged bezel.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version