Main > Main Forum
trying to have a coin register a credit but ends up in the return slot Non MAME
mrclean:
how do I do this, and where can i purchase them from , oh yeah and ginsu, i'm getting close but i think i had a bad JAMMA harness i got all my buttons functioning with the exception of "fire right". So i think i need to get a different harness. I hope it was a bad JAMMA harness. It could be the PCB, or could be the Capcom Classic to JAMMA Adapter I'm not sure.
SirPeale:
I'm reading this right, you're trying to get a quarter to give you credits, but when you drop a quarter it ends up in the reject, is that correct?
If it is, you need quarter mechs. Likely you have token mechs. I have some brand new Happ mechs for $15 plus shipping, or some used ones for $5.00 each plus shipping. It's just a matter of removing the old mechs and putting the new ones in their place.
Ken Layton:
If the "lockout coils" are not energized then all coins inserted will be rejected to the coin return hole.
5301-10 should be a US quarter acceptor.
Appears you have this door:
http://arcarc.xmission.com/PDF_Coin_Mechs_Etc/Coinco/Coinco_2802_Series_Game_Door.pdf
mrclean:
yeah that looks like an exploded view , so ken how to i fix this issue ? or energize the coil ?
SirPeale:
Bloody hell...can't believe I missed that.
You can just remove those lockout coils. Just tie the wires to the side.
Let me guess: converted Atari cab?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version