Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: WG4900 Foldover!!!  (Read 1439 times)

0 Members and 1 Guest are viewing this topic.

yukonblaze

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 201
  • Last login:February 16, 2023, 11:32:48 am
WG4900 Foldover!!!
« on: September 03, 2008, 04:32:30 pm »
Have a slight foldover on right side of monitor (about 1/16th of screen).  I did a cap kit with no resolve.  Was wondering if there are any other caps, that arent usually part of cap kit that should be changed??

Thanks

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: WG4900 Foldover!!!
« Reply #1 on: September 03, 2008, 04:39:35 pm »
Is this a horizontally mounted monitor or vertically mounted?

yukonblaze

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 201
  • Last login:February 16, 2023, 11:32:48 am
Re: WG4900 Foldover!!!
« Reply #2 on: September 03, 2008, 04:49:05 pm »
My apologies, it is mounted vertically (TRON)!! :P

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: WG4900 Foldover!!!
« Reply #3 on: September 03, 2008, 05:32:35 pm »
If your version of the 4900 is equipped with a "Vert Damp" control, adjust it.

yukonblaze

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 201
  • Last login:February 16, 2023, 11:32:48 am
Re: WG4900 Foldover!!!
« Reply #4 on: September 03, 2008, 06:37:26 pm »
Will give it a shot when a friend can stop by to help.  Wife would usually help, but always ends up worse than it started.

yukonblaze

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 201
  • Last login:February 16, 2023, 11:32:48 am
Re: WG4900 Foldover!!!
« Reply #5 on: September 08, 2008, 06:54:19 pm »
Adjusted vert damp without resolve.  Have been told to switch out 306 as my cap kit didnt include (306).  I have a 2.2 50v left from recap, but electrolyc vs tantal??  Dont know enough to know if this will work.

Thanks