No display on D9200

[daeven]

I just picked up a refurbished Wells Gardner D9200.  I am getting no display from the PC.  The D9200 on-screen menu looks beautiful, and when I unplug the PC I get a 'no signal' message, so it obviously knows when there is a signal.

I also tried three different PCs all with different video cards.  I set the video settings to 640x480, 256 colors, 60 Hz.

Video cards tried:
-Diamond Stealth 3D 2000 (S3 ViRGE) w/Windows 98
-NVIDIA GeForce2 MX w/Windows 2000
-Rage XL PCI w/Windows 2000

Too bad WG didn't include a manual with this thing.  I'm probably missing something simple.

Thanks for any advice!

[PhoneGuy]

There are two sets of pins on the small board where you plug in the PC's VGA cable.  I think they are labled vga and cga (I'm not at home to look).  Check see if the cable coming from the neck board is plugged into vga.  I had a refurb chassis that was plugged into cga.  I had no picture until I moved it to vga.    

[daeven]

That did it!  Thanks for the help!