Mr. Do White Sideart, does anyone on this forum own this machine?

[rotheblog]

Group,

I have seen postings about this machine in the past, but I didn't see any answers, and usually it was inside another topic.  Does anyone on this group have the White Side Art Mr. Do?  I know of two machines and their locations, but both of them have pretty worn sideart, and I was kind of hoping to get some really good hi-resolution photos of the sideart to vectorize and remake it for my own machine.

The machine I am talking about is this (Seems to be a dedicated version as well as a conversion model);

http://www.rotheblog.com/images/arcade/artwork/mrdolarge/Conversion_Left2_Sideart.jpg
http://www.rotheblog.com/images/arcade/artwork/mrdolarge/Conversion_Left4_Sideart.jpg
http://www.rotheblog.com/images/arcade/artwork/mrdolarge/conversion_sidart.jpg

Any leads or any help at all is greatly appreciated, even links to previous threads I may have missed.

Thanks.

Jay

[Mr. Do]

WOW!  You really did do a lot of legwork on this one.  I also edited my reply on MW accordingly.  Are you planning on vectoring the bezel from the photos you got?  Please email when you get a chance.

 

Group,

I have seen postings about this machine in the past, but I didn't see any answers, and usually it was inside another topic.  Does anyone on this group have the White Side Art Mr. Do?  I know of two machines and their locations, but both of them have pretty worn sideart, and I was kind of hoping to get some really good hi-resolution photos of the sideart to vectorize and remake it for my own machine.

The machine I am talking about is this (Seems to be a dedicated version as well as a conversion model);

http://www.rotheblog.com/images/arcade/artwork/mrdolarge/Conversion_Left2_Sideart.jpg
http://www.rotheblog.com/images/arcade/artwork/mrdolarge/Conversion_Left4_Sideart.jpg
http://www.rotheblog.com/images/arcade/artwork/mrdolarge/conversion_sidart.jpg

Any leads or any help at all is greatly appreciated, even links to previous threads I may have missed.

Thanks.

Jay

[rotheblog]

I am planning on vectorizing all that I can, from what I can get.  The main problem I am having right now, is that the two machines I know the where abouts have really worn down sideart.  Apparently because it was 3rd party, it wasn't done very well or something, the wear is really bad.

So again, with only knowing about two of these, my resources are limited.  I am thinking any other owners of this game probably doesn't frequent the forums, so I need some "8 degrees of seperation" to happen, a contact of a contact kind of thing to make this happen.

Thanks for the replies again.

Jay

[rotheblog]

I guess my next question would be, since no one actually knows someone who owns this machine...

Does anyone out there know someone at PA Gameroom Warehouse?  Does anyone have a contact there that would be helpful if I called to get some photos of their machine?

Thanks.

Jay