Main > Software Forum

Atomic FE & Joystick

<< < (3/4) > >>

Kaytrim:
I tested the stick in windows before I did anything else and it does work.  I am not in front of my cab right now but I believe that I chose 4 way for the frond end mode.

I'll check tonight if I have the time.  I may not be able to get on this until after April 15th.  I still have to do my Income Taxes.

TTFN :cheers:
Kaytrim

youki:
Try to put mode 1 or 2  (raw mode or progressive mode).

And on the option tab of AtomicManager.

Check  the checkbox :  Analogic mode for joystick

(in this mode more you press, faster the list goes)


Another thing, the Joystick must detected as Joystick 1 ...

Kaytrim:

--- Quote from: youki on March 28, 2007, 01:45:40 pm ---Another thing, the Joystick must detected as Joystick 1 ...

--- End quote ---

That is where the rub is.  My 49-way is detected as joystick 2.  I also have a GPWiz for everything else.  Looks like I am going to have to do some rewiring sooner that I thought.  I have a KeyWiz so I can swap cards without too much difficulty.  It is just taking the time to do it.  Thanks Youki.

TTFN :cheers:
Kaytrim 

Kaytrim:

--- Quote from: youki on March 28, 2007, 01:45:40 pm ---Try to put mode 1 or 2  (raw mode or progressive mode).

And on the option tab of AtomicManager.

Check  the checkbox :  Analogic mode for joystick

(in this mode more you press, faster the list goes)


Another thing, the Joystick must detected as Joystick 1 ...


--- End quote ---

I have everything wired to the GPWiz49 and it is the only joystick detected.  I have set Atomic for analog mode and set the GPWiz49 mode to 1.  I can use the stick in MAME but it doesn't work in the front end.

Any more words of wisdom???

TTFN :cheers:
Kaytrim

youki:

--- Quote ---it is the only joystick detected
--- End quote ---

Detected as Joystick #1  ???

Just in case try in another mode for he GPWiz mode. (like the 8ways)... just to be sure.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version