Author Topic: Using Set Switch (Defender) (Read 1194 times)

TOK · « **on:** February 21, 2007, 12:26:18 pm »

Can someone clue me in on this? I'm trying to change some of the defaults on Defender. When I hit F2 and enter the config, I can't get past the first screen. I looked at all the key mappings, and Auto Up (whatever that is) is set to F2, and the Advance and Service switches are set to the + and - on the keypad in the Defender config and also there are service switches set to Z and 9 in the general MAME settings. It seems like no matter what combination of those keys I hit, nothing happens.

What am I missing?

SirPeale · « **Reply #1 on:** February 21, 2007, 07:39:05 pm »

I just tried it. F2 steps thru each option, and 9 thru the choices in each option.

TOK · « **Reply #2 on:** February 21, 2007, 08:19:23 pm »

I must have something goofed up in my options, as F2 does nothing. The way you're stating it was exactly how I understood it to work, but its not happening for me.

Thanks for checking and at least getting me on the right track.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Using Set Switch (Defender) (Read 1194 times)

TOK

Using Set Switch (Defender)

SirPeale

Re: Using Set Switch (Defender)

TOK

Re: Using Set Switch (Defender)