Main > Main Forum

Another layout question

<< < (5/5)

NightGod:
Wait, if I read that right, you are planning on using Atari cones as regular buttons? Not just as Player start buttons?

That seems really odd to me.

Animeka:

--- Quote from: NightGod on July 29, 2006, 12:59:44 pm ---Wait, if I read that right, you are planning on using Atari cones as regular buttons? Not just as Player start buttons?

That seems really odd to me.

--- End quote ---

That's what was used for Missile Command on the original cabinet. Lighted ones for the P1/P2 and black non lighted ones for the 3 play buttons...

Marc

Animeka:
Here's the current layout I did, installed on the cabinet (it drooped a bit when I took the picture, hard to keep a cardboard panel steady ;))

Comparing this panel to the current metal one i have, the 2 player configuration is in the same position, the trackball has plenty of space to spin.. The only thing is I'll move P1 about 1/2-1" to the right, it's too close to the wall of the cabinet.

Marc

RobotronNut:
have you tried two players side-by-side with your mock-up?
looks a little tight...

Animeka:

--- Quote from: RobotronNut on July 29, 2006, 02:13:04 pm ---have you tried two players side-by-side with your mock-up?
looks a little tight...


--- End quote ---

That's the same layout for 2 player that I have on the cabinet right now... plays shoulder to shoulder but plays fine. :)

Navigation

[0] Message Index

[*] Previous page

Go to full version