Main > Main Forum
cutting MDF which is better router or circular saw
kiddk1:
I dont have a router table so my fear is the router may wander. Also what can I use to make the grooves for the T-molding?
MikeDeuce:
--- Quote from: kiddk1 on May 05, 2006, 01:09:43 pm ---I dont have a router table so my fear is the router may wander. Also what can I use to make the grooves for the T-molding?
--- End quote ---
You can always use a template and a pattern/flush trim bit. I dont think most people would use a router table for the larger arcade stuff. And you use a slot cutting bit for the t-molding grooves.
I like to rough cut with a jig/circular/bandsaw/etc then bring in the router with a template/guide/straightedge for the clean edge. Saves me from having to make multiple passes.
Tahnok:
--- Quote from: kiddk1 on May 05, 2006, 01:09:43 pm ---Also what can I use to make the grooves for the T-molding?
--- End quote ---
The only thing you should use is a router with a slot cutting bit. Do a search and you will find tons of opinions on which size you need.
MYX:
For matching the sides, I used a scroll saw to get close then routed. If you work with the router a little, it becomes a very comfortable tool to work with. I would not suggest using it as the saw to cut all your pieces. Even with a face mask, I fear I will be sneezing sawdust for a year. (how's that for a visual?)
Navigation
[0] Message Index
[*] Previous page
Go to full version