SNES CONTROLLER ADAPTER FOR PC VIA PRINTER D25 PORT

[aumameman]

EACH WILL BE DESIGNED FOR TWO PLAYERS AT A FRACTION THE PRICE OF THE ONE PLAYER USB ADAPTERS ON THE MARKET. IM NOT SURE WHAT POSTAGE IS BUT IT SOULD  BE NO MORE THAN ~ $10 WORLDWIDE!

THIS IS A FISABILITY STUDY TO SEE IF PEOPLE ARE INTERESTED IN THESE UNITS. THE DESIGN IS FROM THE NET AND IS NOT ORIGINAL. THIS WILL BE DONE FOR LOVE NOT MONEY.

[forbiddenlyrics]

Not really anything to add to the poll, but I made my own and it works great. I would recommend anyone buying one and $10 is about as cheap as you can buy the parts for.

[Hoagie_one]

I also made one using a 4 player adapter to get a 4 player model.  I think they are cool.

[Scott84]

I also made one using a 4 player adapter to get a 4 player model.  I think they are cool.

You made it USB for the Multi-tap? And it works with emulators?

[Hoagie_one]

no, LPT.  I dont have teh chip to program a USB model

[Scott84]

no, LPT.  I dont have teh chip to program a USB model

is there a guide out there to build one?

How do you program it?

[aumameman]

There is a driver, which can be downloaded from http://www.psxpad.com/index_e.php. Dont be put off its called psxpad as the driver is for a selection of different console controllers including the psx and snes.

My design is based on both http://www.tolaris.com/snes-to-parallel/ and http://www.raphnet.net/electronique/snes_adaptor/snes_adaptor_en.php. I guess I tried to take the best of both worlds in the design. My prototype is a single player adapter but I do exect to make a two player model in the next few weeks.