Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: keybard splitter query  (Read 1266 times)

0 Members and 1 Guest are viewing this topic.

Svaroh

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:May 21, 2007, 01:44:32 pm
  • I want to build my own arcade controls!
keybard splitter query
« on: February 06, 2006, 12:34:02 pm »
i just noticed after gathering all the required materials that this circuit http://dragonsden.emuunlim.com/arcaded/split.htm
is for an old 5 pin DIN, is there a reasonably simple way to swap the 5 pin DIN for a 6pin DIN(PS/2) connector?
Logged

RandyT

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7024
  • Last login:January 12, 2026, 01:39:17 pm
  • Friends don't let friends hack keyboards.
    • GroovyGameGear.com
Re: keybard splitter query
« Reply #1 on: February 06, 2006, 01:56:18 pm »
Quote from: Svaroh on February 06, 2006, 12:34:02 pm
i just noticed after gathering all the required materials that this circuit http://dragonsden.emuunlim.com/arcaded/split.htm
is for an old 5 pin DIN, is there a reasonably simple way to swap the 5 pin DIN for a 6pin DIN(PS/2) connector?

The two connectors are signal compatible, but are physically in different arrangements.  Look up the pinouts of each connector and you will see how to make one look like the other.

Both really use only 4 connections.  Clock, Data, 5v, and Ground.

RandyT

Logged

Tiger-Heli

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5447
  • Last login:January 03, 2018, 02:19:23 pm
  • Ron Howard? . . . er, I mean . . . Run, Coward!!!
    • Tiger-Heli
Re: keybard splitter query
« Reply #2 on: February 06, 2006, 03:56:21 pm »
Stephen Hans has the pinouts for both circuits on his site - http://www.ionpool.net/arcade/mame/keyboard_hacks/tricks.html

(Took a while to find that, though).
Logged
It's not what you take when you leave this world behind you, it's what you leave behind you when you go. - R. Travis.
When all is said and done, generally much more is SAID than DONE.

Svaroh

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:May 21, 2007, 01:44:32 pm
  • I want to build my own arcade controls!
Re: keybard splitter query
« Reply #3 on: February 06, 2006, 04:45:35 pm »
sweet! thanks guys, every time i found a link to stephen hans site it was a dead link/old link. you guys rock, and quick too
Logged

Grasshopper

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2378
  • Last login:January 13, 2026, 11:39:28 am
  • life, don't talk to me about life
Re: keybard splitter query
« Reply #4 on: February 06, 2006, 05:01:20 pm »
Logged
"Patriotism is the last refuge of the scoundrel." - Samuel Johnson

dkraines

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14
  • Last login:February 11, 2013, 07:38:49 am
  • I'm a llama!
Re: keybard splitter query
« Reply #5 on: February 06, 2006, 05:30:32 pm »
Logged
Pages: [1]
  
Go Up
« previous next »