Author Topic: Betson Multisync works with Golden Tee Fore PCB! (Read 1020 times)

markrvp · « **on:** November 22, 2005, 03:15:30 pm »

I'm trying to decide whether or not to buy a Golden Tee Fore PCB kit.

StephenH · « **Reply #1 on:** November 26, 2005, 01:52:34 am »

If you have the multisync that does 15-38Khz, it should be OK. CGA res is 15Khz, and Medium Res (EGA) is 25Khz.

markrvp · « **Reply #2 on:** November 26, 2005, 02:44:33 pm »

Okay, I just got my Golden Tee fore 2005 PCB and it does work with the Betson Multisync 27" The monitor chassis has a six pin connector (just like a CGA monitor) where you plug in the R,G,B,Ground,Sync lines.

If someone were wanting to buy a monitor to use with a Golden Tee board, then IMHO this would be a better solution than an EGA-only monitor as you can always use the Multisync later on for anything else you want.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Betson Multisync works with Golden Tee Fore PCB! (Read 1020 times)

markrvp

Betson Multisync works with Golden Tee Fore PCB!

StephenH

Re: Betson Multisync for Golden Tee Fore PCB?

markrvp

Re: Betson Multisync works with Golden Tee Fore PCB!