unknown monitor in silverline 26 cab

[kangarolf]

Hi all,

Trying to identify the monitor in this cab so that I can go ahead and set up advance mame using ADVV etc. I cant seem to find any identifying marks on the board/neck/tube except a JVC mark on the focusing/screen component. Here are some pictures of the monitor. Sorry they are not complete top down images but the screen is still in the cab!

Any help greatly appreciated. Rolf

[Ken Layton]

It's definitely some kind of Electrohome monitor, but it's one I've never seen before. The gold metal frame and the width coils give it away. There should be a paper label on the side of the black metal circuit board frame with model numbers on it.

[kangarolf]

Thanks for the reply Ken,

I had some more looking about but could only find references online for A G19-CCO. I had a look about the chasis and there was indeed a paper number but with a code of G19-AEO, but underneath this was the number G19-CCO...very curious.

I can send some images of the actual chasis if you think it might help identify what it is (I have a spare chasis that I can take a proper picture of.) I would like to get a cap kit but dont want to end up with all the wrong size capacitors.

What are the 'usual' specs for these monitors..? Currently I am having a lot of trouble trying to get a stable display at 240 lines..cant only get it at 241 lines!

Any help as always greatly appreciated.

Rolf

[pcb]

It certainly looks like a G07-CC0.  Here's a link to pictures from Bob Roberts' Site.

http://homearcade.org/BBBB/go7odd.html

Thanks or the email and the kind words about my site!

Best,

 - Mike -