Author Topic: bagman what monitor to use ??? (Read 1334 times)

arcadefever · « **on:** July 13, 2005, 12:00:13 pm »

hi,
i`m restoring a bagman game and i've problem to adjust the monitor the graphics are not that good some weird vertical line apears, i use a new monitor , when i plug the game in my 6 other cabs same thing happen exept in the bad dudes cabinet

do some game work better on some monitor

thanks

Ken Layton · « **Reply #1 on:** July 13, 2005, 12:40:31 pm »

Bagman used a conventional horizontal shelf mount monitor mounted vertically. I believe they were originally shipped with Wells-Gardner k4900 series monitors.

pcb · « **Reply #2 on:** July 14, 2005, 04:40:36 pm »

I'm not sure about this, but it's possible that Bagman had POSITIVE sync instead of the normal negative sync. You might try using the positive sync inputs on the monitor to see if it makes a difference.

Best,

- Mike -

arcadefever · « **Reply #3 on:** July 14, 2005, 07:11:54 pm »

Quote from: pcb on July 14, 2005, 04:40:36 pm

I'm not sure about this, but it's possible that Bagman had POSITIVE sync instead of the normal negative sync. You might try using the positive sync inputs on the monitor to see if it makes a difference.

Best,

- Mike -

thanks mike , just one thing wher can i found the positive sync $:-\$ on the monitor ?
anyway when i try the board on bad dudes it work and bad dudes use negative sync .

pcb · « **Reply #4 on:** July 15, 2005, 01:20:51 am »

There is usually a 2nd set of sync inputs. It depends on your monitor.
If the board syncs in the Bad Dudes cab, maybe your other cabs don't have a good video ground? I'm just guessing here, since I don't know what monitor your using, or how they are wired.

arcadefever · « **Reply #5 on:** July 15, 2005, 10:32:52 am »

i think that the problem the video ground $:-\$
thanks for the help

arcadefever · « **Reply #6 on:** July 18, 2005, 03:00:44 pm »

hey PCB
thanks so much for telling me to check the video ground. on bagman the setup is a little diferent the video so i check it up and try something and it is working perfectly . thanks for the tips
fred

unix4hire · « **Reply #7 on:** July 18, 2005, 04:54:26 pm »

You're restoring a bagman? That's great, I haven't been able to find one since the only one I saw about 18 years ago in a laundromat my folks owned. Damn, too bad I didn't have them keep the games before they sold the joint. Good luck, send a pic when it's complete if you don't mind.
--Erich

pcb · « **Reply #8 on:** July 20, 2005, 03:41:40 pm »

Quote from: arcadefever on July 18, 2005, 03:00:44 pm

hey PCB
thanks so much for telling me to check the video ground.

Glad you got it figured out.

Best,

- Mike -


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: bagman what monitor to use ??? (Read 1334 times)

arcadefever

bagman what monitor to use ???

Ken Layton

Re: bagman what monitor to use ???

pcb

Re: bagman what monitor to use ???

arcadefever

Re: bagman what monitor to use ???

pcb

Re: bagman what monitor to use ???

arcadefever

Re: bagman what monitor to use ???

arcadefever

Re: bagman what monitor to use ???

unix4hire

Re: bagman what monitor to use ???

pcb

Re: bagman what monitor to use ???