Author Topic: jamma grounds (Read 1008 times)

kenzo42 · « **on:** May 29, 2005, 02:50:46 am »

are all the grounds on a jamma connector common?

for example, can i switch #"1" with "e" and not have any problems?

thanks.

Dave_K. · « **Reply #1 on:** May 29, 2005, 12:40:57 pm »

First of all, E is -5V, so you don't want to be doing that. Second, why would you want to switch out #1?

kenzo42 · « **Reply #2 on:** May 29, 2005, 01:31:34 pm »

First of all, E is -5V, so you don't want to be doing that.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news