Arcade Collecting > Miscellaneous Arcade Talk

Missle Command Circut Board

<< < (8/9) > >>

Rocky:
Wade,

That's great.

Wade:
Yeah, I wasn't sure either.  In fact, I was pretty sure I WASN'T going to get it working.

I had tried reseating the chips already.  Cleaning them with sandpaper was my "last ditch" effort.  I didn't expect it to help and was really surprised when it did.  I don't know that the sanding made a difference, it could just be that I didn't have them seated straight from the last time, or something else like that.

Relieved...

Thanks for the help guys!  Saved me $100 dollars or more!

Wade

RayB:

Does your machine have a coin counter? If not, maybe that black and white wire is for powering the coin counter.

In any case, it works now. Just tape up those loose wires so they don't accidentally touching something else and short-out something.

Wade:
Yeah, it has two counters, one for each slot, and they are powered through a big harness connector along with the other coin door stuff.  At first I thought it might be for the volume control but it is hooked up and works.

I'll get some pics and then just tape them up.  I suspect it is a factory omission.

Wade

RayB:
Do you still have a slam switch?
Does your coin door have lights?

Navigation

[0] Message Index

[#] Next page

[*] Previous page