Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: RetroKade side-art-scanning work-in-progress  (Read 7259 times)

0 Members and 1 Guest are viewing this topic.

Ravage

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 94
  • Last login:April 17, 2023, 05:00:36 am
  • I'm a WIlliams Nut!
    • RetroKade Limited
RetroKade side-art-scanning work-in-progress
« on: December 14, 2004, 06:45:02 pm »
Hi Folks,
Busy day at the office today... For you guys... I'm just off to London for a few days, but thought some thumbnails would be in order...

1. Berzerk Sideart (for Mahuti - tho I'd love to vector this one too)
<IMAGE DELETED - NOW IN VECTOR ART LIBRARY>

2. Dig-Dug Sideart (was requested, will use to clean up bezel, and probably happy to vector - battery on the laptop died this far but just a taster!)
<IMAGE DELETED - NOW IN VECTOR ART LIBRARY>

3. Burger Time side-art (was requested by Zorg)


4. Moon Patrol Sideart (was requested by zorg - but I'm a Williams Nut so *I* wanna do this baby - wont take long either) - need patching onto a full side of joust artwork to get the right dimensions first:
<IMAGE DELETED - NOW IN VECTOR ART LIBRARY>

5. Taito Space Invaders Side-art (already hsown, just sorta thought i better centralise my WIP. Currently Zorg and I are gonna have a go at this, I've started and done the space ships and hav a alien (thanks zorg), will take up Mahutis idea for a WIP place as all these as compression 8 JPGs are 20 meg odd)


Whilst rummaging around retrokade pulling these out I noticed some more cabs that deserve scanning and I will do for the cause... My lsit so far is:
i) Star Castle Sideart
ii) Atari Xevious Sideart
iii) Atari Crystal Castle Sideart
iv) 'Exploding williams' sideart - all my cabs are rough with this and it looks near impossible to vector, but I hope to get the big tracer-cheeses involved as this ones personal :)
v) Stern Scramble Sideart (bezel is a *must folks - help with a scan of this if you can!!!)
vi) Midway Space Invaders?

Stuff I'd love to do but my scanner wont work with
i) Moon Patrol Bezel
ii) Taito Space Invader Bezel
iii) Tapper Bezel
iv) in fact, any glass object :(

Ok, massive post with lost of pics, hope everyones keen as mustard - P.S. RKD has 150-odd more dedicated - check www.retrokade.com or my entry on vaps if your after something... Just wish a glass scaner could be found like my HP4600 for the cause!

regards, Rav
« Last Edit: December 23, 2004, 02:38:48 pm by Ravage »


mahuti

  • Wiki Master
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 2757
  • Last login:September 18, 2024, 01:16:22 pm
  • I dare anything! I am Skeletor!
Re: RetroKade side-art-scanning work-in-progress
« Reply #1 on: December 14, 2004, 07:24:21 pm »
PS, sorry I've been so slow lately, I was supposed to help Zorg and some others here and there, but my business is out of control busy right now... I thought I'd be able to take a month off around Christmas, but no luck... Anyway, I'll get the FTP taken care of, but I won't be making a lot of movement on any task that takes more than a few minutes of concentration a day until at least after Xmas.
Raspberry Pi, AttractMode, and Skeletor enthusiast.

zorg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1102
  • Last login:May 19, 2022, 09:00:38 am
Re: RetroKade side-art-scanning work-in-progress
« Reply #2 on: December 15, 2004, 03:32:17 am »
woooosh ;)

thank's this is a nice christmas gift for all of us.

how can we access the scans ?

thank's ravage.
« Last Edit: December 15, 2004, 03:44:11 am by zorg »
I'm on the planning stage

Ravage

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 94
  • Last login:April 17, 2023, 05:00:36 am
  • I'm a WIlliams Nut!
    • RetroKade Limited
Re: RetroKade side-art-scanning work-in-progress
« Reply #3 on: December 15, 2004, 07:00:31 am »
Actually ended up with a spare hour before shooting off so seeing Mahutis busy, I've vectored Berzerk.  :laugh:

Enjoy!


zorg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1102
  • Last login:May 19, 2022, 09:00:38 am
Re: RetroKade side-art-scanning work-in-progress
« Reply #4 on: December 15, 2004, 07:27:02 am »

4. Moon Patrol Sideart (was requested by zorg - but I'm a Williams Nut so *I* wanna do this baby - wont take long either) - need patching onto a full side of joust artwork to get the right dimensions first:


you can check  http://www.jakobud.com/cabinetPlans.php

jakobud has the MoonPatrol plans. it may helps
I'm on the planning stage

mahuti

  • Wiki Master
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 2757
  • Last login:September 18, 2024, 01:16:22 pm
  • I dare anything! I am Skeletor!
Re: RetroKade side-art-scanning work-in-progress
« Reply #5 on: December 15, 2004, 10:16:37 am »
OK, I've changed the password for share.localarcade.com, and I'll be PMing you both with it shortly.

I also established transfer.localarcade.com for all of the users that need to transfer work to me, which will take the place of share.localarcade.com. I'll post the password and username for that whenever appropriate.
Raspberry Pi, AttractMode, and Skeletor enthusiast.

mahuti

  • Wiki Master
  • Trade Count: (0)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 2757
  • Last login:September 18, 2024, 01:16:22 pm
  • I dare anything! I am Skeletor!
Re: RetroKade side-art-scanning work-in-progress
« Reply #6 on: December 15, 2004, 10:25:10 am »
PMs sent.
Raspberry Pi, AttractMode, and Skeletor enthusiast.

zorg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1102
  • Last login:May 19, 2022, 09:00:38 am
Re: RetroKade side-art-scanning work-in-progress
« Reply #7 on: December 15, 2004, 10:59:02 am »
thank's

I'm getting it rigth now.

do you want me to up it to mahuti's ftp (for bandwith sharing)?
 
I'm on the planning stage

Ravage

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 94
  • Last login:April 17, 2023, 05:00:36 am
  • I'm a WIlliams Nut!
    • RetroKade Limited
Re: RetroKade side-art-scanning work-in-progress
« Reply #8 on: December 16, 2004, 06:47:39 am »
Mon  patrol side-art is now in the bag baby!  8)


zorg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1102
  • Last login:May 19, 2022, 09:00:38 am
Re: RetroKade side-art-scanning work-in-progress
« Reply #9 on: December 16, 2004, 07:12:53 am »
Mon  patrol side-art is now in the bag baby!  8)

really nice ;)
I'm on the planning stage

Ravage

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 94
  • Last login:April 17, 2023, 05:00:36 am
  • I'm a WIlliams Nut!
    • RetroKade Limited
Today's RKD scans
« Reply #10 on: December 17, 2004, 06:43:28 pm »
Yep.. More...

Not only finished scanning Dig-dug, hit a few more: Heres previews of the scans:

1. Atari Crsytal Castles Sideart
<IMAGE DELETED - NOW IN VECTOR ART LIBRARY>

2. Atari Xevious Sideart


3. Starcastle Sideart


And also started on Black widow before the laptop battery failled (must take the power supply with me, ho hum)

Plenty for me to vector over x-mas!!!
« Last Edit: December 23, 2004, 02:39:11 pm by Ravage »


zorg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1102
  • Last login:May 19, 2022, 09:00:38 am
Re: RetroKade side-art-scanning work-in-progress
« Reply #11 on: December 18, 2004, 04:49:21 am »
I'm volunteer for the crystal-castle.

I'm on the planning stage

Ravage

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 94
  • Last login:April 17, 2023, 05:00:36 am
  • I'm a WIlliams Nut!
    • RetroKade Limited
Re: RetroKade side-art-scanning work-in-progress
« Reply #12 on: December 23, 2004, 02:37:39 pm »
More x-mas scanning this afternoon... Heres whats added to the to-do pile....

1. Atari Black Widow Side-art


2. Atari Gravitar Side-Art


3. Centuri Gyruss Side-Art
<IMAGE SUBMITTED TO ART LIBRARY - THUMBNAIL DELETED>

4. Midway Wizard of Wor Side-Art


5. Taito Zookeeper Side-Art


That'll keep me busy over x-mas! Actually, there probably too much now... Theres still...
i) Taito Space Invader Side-Art (10% done)
ii) Atari Xevious Side-Art (0%)
iii) Cinematronics Star Castle Side-Art (0%)
To be considered too!

Merry x-mas anyone - anyone have spare time to do some vectoring ask and I'll upload a scan to trace!

Regards
Rav
(sleeping 3 hrs a day)
« Last Edit: December 23, 2004, 08:32:14 pm by Ravage »


zorg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1102
  • Last login:May 19, 2022, 09:00:38 am
Re: RetroKade side-art-scanning work-in-progress
« Reply #13 on: December 24, 2004, 05:03:40 am »
as I nearly finished the Burgertime side art (tracing peper is much more time consuming than I expected)  and as I will be in  hollidays next week

I'm volunteer for the xevious, gravitar and  zookeeper ones. up it to the share ftp.
I'm on the planning stage

Ad_Enuff

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 332
  • Last login:May 23, 2013, 01:52:14 pm
  • Forensic Imager
    • MAME COVERS
Re: RetroKade side-art-scanning work-in-progress
« Reply #14 on: December 24, 2004, 05:21:37 am »
That Atari Xevious Sideart looks gorgeous!
Ad_Enuff
www.mameworld.net/mrdo/mame_artwork.html - (MAME Artwork Project)

zorg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1102
  • Last login:May 19, 2022, 09:00:38 am
Re: RetroKade side-art-scanning work-in-progress
« Reply #15 on: December 27, 2004, 12:27:42 pm »
BurgerTime side art is now in tha AAL.
see http://www.localarcade.com/4images/details.php?image_id=553
I'm on the planning stage

Ravage

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 94
  • Last login:April 17, 2023, 05:00:36 am
  • I'm a WIlliams Nut!
    • RetroKade Limited
Re: RetroKade side-art-scanning work-in-progress
« Reply #16 on: December 27, 2004, 07:42:23 pm »
Nice job Zorg!
I only managed to up the xevious, hope that'll keep you busy (the trees!The trees! argh!)

Will up zookeeper over the next few days
Regards
Rav


zorg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1102
  • Last login:May 19, 2022, 09:00:38 am
Re: RetroKade side-art-scanning work-in-progress
« Reply #17 on: December 28, 2004, 04:36:58 am »
thank's some more tracing in perspective
I don't know if my wife will thank you too ;)
I'm on the planning stage

yelahttam

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:February 14, 2005, 07:21:35 pm
  • I want to build my own arcade controls!
Re: RetroKade side-art-scanning work-in-progress
« Reply #18 on: January 14, 2005, 05:39:09 pm »
I'm a new member, and I'm working on art for a XEVIOUS cabinet. Could I have access to the ftp site, or could someone e-mail me the hi-res scans of the Xevious sideart? Thanks! - mh

Ravage

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 94
  • Last login:April 17, 2023, 05:00:36 am
  • I'm a WIlliams Nut!
    • RetroKade Limited
Re: RetroKade side-art-scanning work-in-progress
« Reply #19 on: January 24, 2005, 09:09:58 pm »
Damn... Half-Life 2s sucked hours out of me - I knew it would! Heh

And what time I had put in was on Wiz Wor sideart to find someone else is further ahead than me! Anyhow, that serves me right hey? :p

Anyhow, just a quick note to say I'm back on the scene... Did you get the xevious file or do you still need it?
Regards
Rav


yelahttam

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:February 14, 2005, 07:21:35 pm
  • I want to build my own arcade controls!
Re: RetroKade side-art-scanning work-in-progress
« Reply #20 on: January 25, 2005, 05:37:14 pm »
I still need any and all hi-res scans of Xevious side-art, marquees, etc. You can e-mail me at yelahttam@mindspring.com with ftp info, thanks! - mh

zorg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1102
  • Last login:May 19, 2022, 09:00:38 am
Re: RetroKade side-art-scanning work-in-progress
« Reply #21 on: January 26, 2005, 05:20:40 am »
bad news guys ;-)

after some trouble at work, and a lot of angry aout myself, I ended broking my rigth hand. so vectorisation from my part will take a break....

I'll be back tracing as soon as possible (I guess it will be good for my hand re-education)
I'm on the planning stage

zorg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1102
  • Last login:May 19, 2022, 09:00:38 am
Re: RetroKade side-art-scanning work-in-progress
« Reply #22 on: January 26, 2005, 05:22:58 am »
I still need any and all hi-res scans of Xevious side-art, marquees, etc. You can e-mail me at yelahttam@mindspring.com with ftp info, thanks! - mh

sorry I tried to upp the file on a ftp server I have acces to, but i can't up file bigger than 75 Mb, and the ful scan is 90Mb

I'll try to cut the file in 2 pieces and up them. If I succed with my broken hand, I'll up the parts and let you know where to dl the file
I'm on the planning stage

megashock5

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 268
  • Last login:May 19, 2015, 06:51:16 am
Re: RetroKade side-art-scanning work-in-progress
« Reply #23 on: January 27, 2005, 08:53:49 am »
Are you looking for people to vectorize these? I could probably do Black Widow.

Let me know!

zorg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1102
  • Last login:May 19, 2022, 09:00:38 am
Re: RetroKade side-art-scanning work-in-progress
« Reply #24 on: January 28, 2005, 04:59:35 am »
I still need any and all hi-res scans of Xevious side-art, marquees, etc.

the xevious side art full size scan, splitted in 7 files is available here
http://instcard1.free.fr/
enjoy
I'm on the planning stage

yelahttam

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 3
  • Last login:February 14, 2005, 07:21:35 pm
  • I want to build my own arcade controls!
Re: RetroKade side-art-scanning work-in-progress
« Reply #25 on: February 14, 2005, 07:21:35 pm »
Thanks so much for the XEVIOUS side art, I'm vectorising it, but it will obviously take a little while. Doe sanybody have a good flat shot of the marquee and bezel from XEVIOUS as well? - mh
http://www.matthaley.com

zorg

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1102
  • Last login:May 19, 2022, 09:00:38 am
Re: RetroKade side-art-scanning work-in-progress
« Reply #26 on: February 15, 2005, 02:55:09 am »
Thanks so much for the XEVIOUS side art, I'm vectorising it, but it will obviously take a little while. Doe sanybody have a good flat shot of the marquee and bezel from XEVIOUS as well? - mh
http://www.matthaley.com

humm if the vector version you are doing is half as nice as the art displayed on your pages, it will be extraordinary, I'm impatient to see the result.
I'm on the planning stage

Ravage

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 94
  • Last login:April 17, 2023, 05:00:36 am
  • I'm a WIlliams Nut!
    • RetroKade Limited
Re: RetroKade side-art-scanning work-in-progress
« Reply #27 on: February 15, 2005, 04:08:02 am »
Doe sanybody have a good flat shot of the marquee and bezel from XEVIOUS as well?

I have a repro marquee unapplied... When I get a chance I'll scan it - tho is there ay point as you can buy repros already?

I'll look how easy it is to get the cardboard bezel out and It it'll lay flat

Regards
Rav