Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Getting Colour Problems  (Read 2213 times)

0 Members and 1 Guest are viewing this topic.

Led Zeppelin Rock

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 4
  • Last login:January 07, 2005, 04:59:10 am
  • I'm a llama!
Getting Colour Problems
« on: September 26, 2002, 08:21:51 am »
Hi

I was using ADVV for AdvMame and I noticed that the colours on the Arcade Monitor has gone funny, ADVV normally shows up red but it is more of a dull green now, also white is like a murky green/grey. I am using AdvMame through a J-Pac so I will re-connect everything, but if that does not work, what is likley to be the problem, and how hard would it be to fix???

Thanks, Simon

StephenH

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 544
  • Last login:January 09, 2023, 06:15:45 am
  • I'm a llama!
Re:Getting Colour Problems
« Reply #1 on: October 20, 2002, 11:48:12 pm »
Check your wiring.   You may have one or more colors swapped.  

Also, if the monitor is from an older Nintendo arcade unit, you may need a video inverter.   Nintendo used Negative Logic Video in their VS Series, and Playchoice-10 systems.     All the arcade companies used positive logic video.


Also, try a different game, or a real board.   If it does the same thing, it may be a bad monitor circuit.




Hi

I was using ADVV for AdvMame and I noticed that the colours on the Arcade Monitor has gone funny, ADVV normally shows up red but it is more of a dull green now, also white is like a murky green/grey. I am using AdvMame through a J-Pac so I will re-connect everything, but if that does not work, what is likley to be the problem, and how hard would it be to fix???

Thanks, Simon