Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: How to make a dedicated MAME 0.250 Appliance on a Raspberry Pi 4/Pi 400  (Read 130210 times)

0 Members and 1 Guest are viewing this topic.

monsieurarcade

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:March 17, 2024, 04:39:44 pm
  • I want to build my own arcade controls!
Re: How to make a dedicated MAME 0.250 Appliance on a Raspberry Pi 4/Pi 400
« Reply #400 on: March 17, 2024, 04:23:18 pm »
Hi,

Been through almost all the steps up to changing file system to read-only.
Created and executed the script:
~/scripts/read-only-rootfs.sh

After execution, Pi boots but stops at some point.
I don't have console access, neither directly with a keyboard or with putty.

Is there something I can do to correct this or revert back to rw so I don't have to start the whole process again ?
Thanks.

24-7-testing

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 1
  • Last login:March 22, 2024, 11:50:56 am
  • Building a portable Atari Warlords Cocktail!
Re: How to make a dedicated MAME 0.250 Appliance on a Raspberry Pi 4/Pi 400
« Reply #401 on: March 22, 2024, 11:39:31 am »
I am currently building MAME 0.262. I will upload a fresh image once the build is successfully completed.

Hi bbegin, just wondering if you have any progress you can share on the latest version of the prebuilt SD image? Any luck building the latest version yet?