Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: how to change 6 pin molex connection to 15 pin D-sub  (Read 1275 times)

0 Members and 1 Guest are viewing this topic.

rock145

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 141
  • Last login:November 07, 2021, 02:05:20 pm
how to change 6 pin molex connection to 15 pin D-sub
« on: July 23, 2015, 07:19:26 pm »
Hi, I am going to buy this WELLS GARDNER MODEL # 25K2193 monitor I want to know if is possible to make 15 pin D-sub connection to the monitor to connect to pc.
Logged

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19960
  • Last login:Yesterday at 10:00:30 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: how to change 6 pin molex connection to 15 pin D-sub
« Reply #1 on: July 23, 2015, 07:51:04 pm »
Quote from: rock145 on July 23, 2015, 07:19:26 pm
Hi, I am going to buy this WELLS GARDNER MODEL # 25K2193 monitor I want to know if is possible to make 15 pin D-sub connection to the monitor to connect to pc.

Yes, it's possible, but you need to make sure your video card is putting out the correct signal.
Logged
***Build what you dig, bro. Build what you dig.***

rock145

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 141
  • Last login:November 07, 2021, 02:05:20 pm
Re: how to change 6 pin molex connection to 15 pin D-sub
« Reply #2 on: July 23, 2015, 08:09:18 pm »
Quote from: yotsuya on July 23, 2015, 07:51:04 pm
Quote from: rock145 on July 23, 2015, 07:19:26 pm
Hi, I am going to buy this WELLS GARDNER MODEL # 25K2193 monitor I want to know if is possible to make 15 pin D-sub connection to the monitor to connect to pc.

Yes, it's possible, but you need to make sure your video card is putting out the correct signal.

Thanks for the reply. I don't know much about arcade monitors could you provide me with a guide,tutorial or video on how to do this. About the video card I can use ati 4360 with groovymame.
Logged

rock145

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 141
  • Last login:November 07, 2021, 02:05:20 pm
Re: how to change 6 pin molex connection to 15 pin D-sub
« Reply #3 on: July 24, 2015, 02:44:57 pm »
Will this http://www.ultimarc.com/store/section.php?xSec=11  VGA Breakout Cable work? Are these only compatible with arcavga cards only or can I use it with ati cards and groovymame.

Logged
Pages: [1]
  
Go Up
« previous next »