Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Which kind of material for this control panel would you suggest?  (Read 2453 times)

0 Members and 1 Guest are viewing this topic.

daverdfw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 26
  • Last login:June 03, 2015, 03:04:59 pm
  • I want to build my own arcade controls!
Which kind of material for this control panel would you suggest?
« on: May 11, 2015, 11:01:46 pm »
This is a Romstar bubble bobble cabinet, I added some more buttons and stripped off the original adhesive , there is still a lot of reside from the adhesive. I would like to maybe use a laminate but as you can see from the pic it has a curve from the front to the top and to the bottom. What would be the best way to attack this? Thanks!

Logged

Slippyblade

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3167
  • Last login:June 05, 2024, 10:30:57 am
  • And to the death god we say, "Not today!"
Re: Which kind of material for this control panel would you suggest?
« Reply #1 on: May 12, 2015, 12:44:44 am »
You can wrap laminate around that radius.  Just use a heat gun and patience.
Logged

MamedInCanada

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38
  • Last login:February 02, 2016, 06:23:09 am
  • Still Learning...
Re: Which kind of material for this control panel would you suggest?
« Reply #2 on: May 23, 2015, 10:26:06 am »
Fill and sand any holes and dents, use black vinyl and cover with plexi glass / lexan. Drill holes in plexi glass / lexan and secure to top of cp, near the monitor, use heat gun to form plexi around bends. Might be an idea.
Logged

daverdfw

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 26
  • Last login:June 03, 2015, 03:04:59 pm
  • I want to build my own arcade controls!
Re: Which kind of material for this control panel would you suggest?
« Reply #3 on: May 23, 2015, 04:19:32 pm »
I have some vinyl from Happ coming in, I am going to go that route, then get some new lexan
Logged
Pages: [1]
  
Go Up
« previous next »