Arcade Collecting > Merit/JVL Touchscreen
megatouch sapphire kernal error help
wasted wages:
Thank you for the info. I am in the US looks like finding a used HD with key would be the easiest way to fix the issue
mahkeymike:
Actually, I think he can use 2004/2004.5 force install discs to reinstall. I dont have the discs to test this theory. Also dont have a MAXX motherboard. :(
ed12:
hmm i have never tried that 1..? nice tip i will give it a go..
also worth note,op in trouble do not throw out your old hard drive,reason is simple,
with it booting that far it mean's the overlay >mbr< is still intact,with that and some handy
copying s/w u can snap shot the overlay,and repair the bad sectors's..
also try this trick.
switch #3 and either 7 or 8 turn them on,well game is trying to boot,
this fource's it to a full reload state which may or may not re-load the drive from the backup.dat
ed
wasted wages:
I'm guessing when you say switch #3 your talking about turning on dip switch 3 and ither 7 or 8 as it's trying to boot up
ed12:
yes sw#3 and either 7 or 8
but 3 must be on,
so turn on sw#3 leave it on,then test with #7 or #8
all the time leaving sw#3 on
once u find the combo,leave the 2 switch's on as the game will telll u to do..
now please rember this is going to be a hit and miss,might or might not work :dunno
but worth the try
ed
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version