Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: silver strike bowling monitor-"No Signal"  (Read 3261 times)

0 Members and 1 Guest are viewing this topic.

dawitz

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:July 16, 2015, 11:53:14 am
  • I want to build my own arcade controls!
silver strike bowling monitor-"No Signal"
« on: September 06, 2014, 09:35:49 pm »
Am new to this forum and troubleshooting video games.  Have a SSA bowling game and after about 2-3 minutes into a game, the screen would just go into "no signal" and I would have to reboot.   After rebooting, the screen would repeat the no signal. I let the game just sit there and after about 5 minutes,  it would do it again. I just replace the power supply but getting the same results.   Plan to order a new video card as this, I think,  would be the next step.  Has anyone ever seen this?  Dave

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 06, 2025, 10:42:13 am
Re: silver strike bowling monitor-"No Signal"
« Reply #1 on: September 07, 2014, 06:23:23 am »
so the first thing to have done is to connect a pc monitor and see if it does the same thing
reseat the ram modules on the motherboard and look for any bad capacitors
check thermal paste on cpu and check cpu fan is running perfectly
try different graphic card

dawitz

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 2
  • Last login:July 16, 2015, 11:53:14 am
  • I want to build my own arcade controls!
Re: silver strike bowling monitor-"No Signal"
« Reply #2 on: September 13, 2014, 03:25:28 pm »
I found the problem in one of the video card caps.  it had white stuff coming out of the top like some kind of corrosion. (Sorry, don't know the correct term for that.)  Also the top of the cap was pushed out.  Tried another video card and its been working for about an hour or so.  Hopefully, it will last.  Thanks for your grantspain!

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:July 06, 2025, 10:42:13 am
Re: silver strike bowling monitor-"No Signal"
« Reply #3 on: September 13, 2014, 05:31:16 pm »
I found the problem in one of the video card caps.  it had white stuff coming out of the top like some kind of corrosion. (Sorry, don't know the correct term for that.)  Also the top of the cap was pushed out.  Tried another video card and its been working for about an hour or so.  Hopefully, it will last.  Thanks for your grantspain!
yes very common,dead cap