Author Topic: Point me to an inexpensive LED joystick (Read 1701 times)

Sarver Systems · « **on:** April 07, 2014, 11:13:03 am »

I'm building a cocktail cabinet, and I'm good to go on everything except for the 2 joysticks.

I know I want 2 joysticks, both with LED balls, preferably color changing LEDs. I can swap out LEDs if I need to.

They'll be mounted in a 3/4 wooden CP, and I need 8-way sticks.

Paradise has them, but at $50.50, that's out of my price range.

I'd also entertain the thought of taking a regular stick, and converting it to LED if the price was right.

yotsuya · « **Reply #1 on:** April 07, 2014, 11:19:19 am »

That's about the going rate for LED joysticks.

Sarver Systems · « **Reply #2 on:** April 07, 2014, 11:43:03 am »

I was expecting to pay about half of that.

So I might just go with boring red ball tops then.

What length shaft should I go with for 3/4" panel?

yotsuya · « **Reply #3 on:** April 07, 2014, 11:53:29 am »

See if ebarlow will rout out the bottoms of your control panel so that you can use regular sticks.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Point me to an inexpensive LED joystick (Read 1701 times)

Sarver Systems

Point me to an inexpensive LED joystick

yotsuya

Re: Point me to an inexpensive LED joystick

Sarver Systems

Re: Point me to an inexpensive LED joystick

yotsuya

Re: Point me to an inexpensive LED joystick