Ipac question

[pathdoc2]

Can the IPAC be programmed to send 2 keystrokes or keys rather than just one with a single button press.  I'm using an IPAC on a nonvideo/arcade project and I need to be able to program it such that pressing one button on the control panel causes 2 keys to be depressed (for example shift and the + key).  Can the IPAC do this?  If not I'll use a KE72 I have in another cab and put the IPAC into that game.
Thanks

[RandyT]

Just hook two inputs to the same button.

RandyT

[pathdoc2]

Pure genius my friend.

[grafixmonkey]

If you need to have one button press and then the other press, in a reliable order, then put a decent size (at least 500 uF) capacitor between ground and the button that has to come second.

[Tiger-Heli]

Just hook two inputs to the same button.

RandyT

Right, but use diodes if you don't want to lose one input.  In other words - you can program 1B1 to LShift, 1B2 to +, and wire a button to both inputs, but if you also want to have a button wired to 1B1 that ONLY activates Lshift, it will activate now activate both LShift and +, even if only wired to 1B1, unless you use diodes.

See http://www.fraggersxtreme.com/arcadepanels/encoder/keywiz_pausekey.jpg
for a picture of a circuit using diodes for the buttons