Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: What to do with leftover parts...  (Read 4394 times)

0 Members and 1 Guest are viewing this topic.

Nephasth

  • Guest
  • Trade Count: (0)
What to do with leftover parts...
« on: September 18, 2012, 10:33:28 pm »
I had a couple meters of RGB LED strips leftover from the cabinet lighting on the Beast, so I decided to put some of it to use. I've been wanting floor lights in my Tundra for a few years, and this was the perfect excuse to make some.

Under the glove box off:


Under the glove box on:


Switch with headlights off:


Switch with headlights on:


View from the back seat with floor lights off:


View from the back seat with floor lights on:


View from outside driver's door:


Really impressed with how these turned out. They're hard wired for red only right now, but I can make short (about 1" long) harnesses to put between the strip connector and harness connector to light them up one of 7 colors. Had to buy the switch and Add-A-Circuit fuse for a total of about $17 and a couple hours for this little project.

What do you do (non arcade related) with your spare parts?

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19960
  • Last login:July 17, 2025, 10:00:30 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: What to do with leftover parts...
« Reply #1 on: September 19, 2012, 12:40:18 am »
What do you do (non arcade related) with your spare parts?

Put them in a box and tell my wife I' m going to use them later!  :cheers:
***Build what you dig, bro. Build what you dig.***

the_gamer

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 80
  • Last login:September 02, 2020, 03:44:06 pm
Re: What to do with leftover parts...
« Reply #2 on: September 19, 2012, 02:32:08 am »
Put them in a box and tell my wife I' m going to use them later!  :cheers:
The keywords in this post are "tell my wife"  :laugh2: mmd  :cheers:

lordnacho

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 509
  • Last login:January 21, 2023, 07:38:14 pm
Re: What to do with leftover parts...
« Reply #3 on: September 19, 2012, 12:32:46 pm »

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10328
  • Last login:July 14, 2025, 02:03:34 pm
  • boom
    • Arcade Madness
Re: What to do with leftover parts...
« Reply #4 on: September 19, 2012, 12:42:46 pm »

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38212
  • Last login:June 22, 2025, 04:57:38 pm
Re: What to do with leftover parts...
« Reply #5 on: September 19, 2012, 01:24:29 pm »

If you look at the last 7-8 years of Tundras and Tacomas it's amazing to see how much they grew in size.  My Tacoma is the same size as the big Tundra in 2004.  A big Tundra now may as well be an F-250.

Nephasth

  • Guest
  • Trade Count: (0)
Re: What to do with leftover parts...
« Reply #6 on: September 19, 2012, 01:58:49 pm »
A big Tundra now may as well be an F-250.

Yeah, too bad they're still only 1/2 ton pickups... But this will be pretty neat...

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38212
  • Last login:June 22, 2025, 04:57:38 pm
Re: What to do with leftover parts...
« Reply #7 on: September 19, 2012, 02:43:57 pm »

The '08 is substantially larger than it was only a few years earlier.  It got a little smaller again after that.  I routinely look down on other Tacomas while sitting in mine even when they have the same suspension package.

JMB

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 455
  • Last login:July 20, 2023, 07:29:22 pm
Re: What to do with leftover parts...
« Reply #8 on: September 19, 2012, 03:04:49 pm »

The '08 is substantially larger than it was only a few years earlier.  It got a little smaller again after that.  I routinely look down on other Tacomas while sitting in mine even when they have the same suspension package.

The Tacoma line was updated in 2005. The 2005 and up double cab is about 3-4 inches taller and roughly 20 inches longer than the 2004 and earlier versions.

Trip

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 206
  • Last login:January 03, 2020, 01:37:04 pm
Re: What to do with leftover parts...
« Reply #9 on: September 19, 2012, 03:37:35 pm »
Tacoma's just a jacked up Camry and I haven't noticed them getting any bigger.

If I never planned on taking my truck off road or hauling anything I'd consider a Tundra.

Tacoma's have gotten too big.  I hate how big my '09 is...  I miss the old indestructible Toyota Trucks.  People want too much money for good condition ones nowadays.

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38212
  • Last login:June 22, 2025, 04:57:38 pm
Re: What to do with leftover parts...
« Reply #10 on: September 19, 2012, 03:43:08 pm »

I love my Tacoma.  It does everything I need well.  I can move multiple games with ease, it handles well with the bed completely packed with camping gear, it has no issues with snow.  We can get our huge plastic canoe everywhere we need to go. 

Hell I can even get MDF in that thing. 

Well Fed Games

  • Trade Count: (+6)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1884
  • Last login:January 07, 2025, 04:42:47 pm
  • Delicious!
Re: What to do with leftover parts...
« Reply #11 on: September 19, 2012, 06:42:12 pm »
Tacoma's just a jacked up Camry and I haven't noticed them getting any bigger.


Ha, yeah, I refer to my '03 Tacoma as a car with a really big trunk. But I have to say, it has served me well!
Completed projects: Pac bartop (Plug & Play), 30th Anniversary Pac cab (MAME), Point Blank (PS1), Centipede (arcade hardware- light restore), VS. Super Mario Bros (arcade hardware- light restore) Tetris Cocktail (SNES), Arcade Classics upright (60-in-1, then MAME), Multi-Raiden (arcade hardware). Pac Man vs.(Gamecube),

Working on: Pinball Re-theme, Homebrew arcade arena shooter

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19960
  • Last login:July 17, 2025, 10:00:30 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: What to do with leftover parts...
« Reply #12 on: September 19, 2012, 06:54:31 pm »
1 bought a 1995 1/5 Tacoma the first year they came out. My dad STILL drives it. Miss that thing.
***Build what you dig, bro. Build what you dig.***

Ed_McCarron

  • Nothing worse than Picard issuing the self destruct order and the next thing you know it your apartment blows up.
  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2404
  • Last login:June 20, 2022, 02:33:39 pm
  • Get your mind out of the gutter. THIS is a dongle.
Re: What to do with leftover parts...
« Reply #13 on: September 20, 2012, 10:00:39 pm »
Hell I can even get MDF in that thing.

Yeah, it's not as funny when you do it...
But wasn't it fun to think you won the lottery, just for a second there???

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38212
  • Last login:June 22, 2025, 04:57:38 pm
Re: What to do with leftover parts...
« Reply #14 on: September 21, 2012, 09:07:08 am »
Hell I can even get MDF in that thing.

Yeah, it's not as funny when you do it...


I take away all the power that I gave you... Nightmare on Elm St style...

Nephasth

  • Guest
  • Trade Count: (0)
Re: What to do with leftover parts...
« Reply #15 on: September 30, 2012, 07:09:16 pm »
These LED strips go a long way...

Added some light to my upper glove box. Circuit is switched with a mercury switch.

yotsuya

  • Trade Count: (+21)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 19960
  • Last login:July 17, 2025, 10:00:30 pm
  • 2014 UCA Winner, 2014, 2015, 2016 ZapCon Winner
    • forum.arcadecontrols.com/index.php/topic,137636.msg1420628.html
Re: What to do with leftover parts...
« Reply #16 on: September 30, 2012, 10:31:38 pm »
These LED strips go a long way...

Added some light to my upper glove box. Circuit is switched with a mercury switch.


Looks good pimpin' your ride, bro!
***Build what you dig, bro. Build what you dig.***