Software Support > GroovyMAME

Cant install drivers in groovymame win xp 64. Visiontek HD 4350 ATI

(1/5) > >>

TJCOMBO:
Will this card work?  I tried uninstalling the drivers in the device manager and I used the appropriate crt drivers but I am getting an error message. Many thanks.

Calamity:
Find the hardware PCI IDs of that card (device manager-> display adapters-> properties-> details. Copy them here.

TJCOMBO:
This is what I have reading in there now:
PCI\VEN_1002&DEV_9553&SUBSYS_3000148C&REV_00\4&52EDC45&0&0048


ETA:

I think this is what you are looking for instead:

Hardware IDs:
PCI\VEN_1002&DEV_9553&SUBSSYS_3000148C&REV_00
PCI\VEN_1002&DEV_9553&SUBSSYS_3000148C
PCI\VEN_1002&DEV_9553&CC_030000
PCI\VEN_1002&DEV_9553&CC_0300

TJCOMBO:
I take it this could be one of those Mobility cards?

TJCOMBO:
OKAY.  I managed to find a thread where you discussed that this is a Mobility card and I ran the mod patch.

I am very confused because the card is recognized as a mobility ATI 4570 and I am not sure the drivers are installed correctly.  What is the deal with me buying a 4350 and its not?  I think that is the major bug here in my setup.

  I followed the steps with editing the VMaker using the NANAO MS-2930/MS-2931 and tested a couple of games and I was really liking what I saw.  However, the picture on the Windows desktop had lines and the monitor did not sound right (I am still new to this, so maybe it was running in interlaced at the wrong horizontal freq?).  I tested MK and it ran great.  The Windows desktop bothered me and I was afraid I'd damage the monitor if something were off.

Anyway,

Here are the monitor specs:
Makvision 25" Tri-Mode Monitor

15/24/31 kHz Hfreq and 47-70 Hz Vfreq with a max resolution of 640x480.

M3125DBC-82 is the model on the chassis.


I went with the NANAO MS-2930/MS-2931 settings, but I am not sure this is 100% correct.  Please let me know if I am missing something.  And many things for your hard work and efforts.

Navigation

[0] Message Index

[#] Next page