Software Support > GroovyMAME
Updated driver for AMD APU (Radeon HD 6410D)?
Calamity:
BEFORE running vmmaker, please check if Arcade_OSD shows more than 60 custom video modes available. Do this when booting with the arcade monitor only.
There's something weird going on: you shouldn't have any doublescanned 320x240 mode with the modified drivers. I'm suspecting something else is active.
ahofle:
Will do. The weird thing is arcadeOSD shows only the 15khz 320x240, no 'native' 320x240 60p shows there.
Calamity:
--- Quote from: ahofle on January 17, 2012, 02:18:31 pm ---Will do. The weird thing is arcadeOSD shows only the 15khz 320x240, no 'native' 320x240 60p shows there.
--- End quote ---
Well that's normal because there is a 320x240 custom modeline that should override the native mode. Try enabling this mode though A_OSD to see it the doublescan thing is triggered.
caskad:
--- Quote from: ahofle on January 17, 2012, 12:13:49 pm ---I'm actually using 'CGA' for monitor type.
Well a bit of an update. I booted into safe mode and uninstalled the drivers there -- rebooted again and installed the CRT_EMU driver (note I haven't run vmmaker yet). Now I see a ton of 15khz resolutions. I'm a little hesitant to run vmmaker because I now have a bunch of 15khz resolutions, but gmame is still picking 320x240 double scanned for vertical 320x240 games. Not sure why. I will probably try running vmmaker tonight to see what happens. I don't have any 1234x resolutions currently.
--- Quote from: caskad on January 17, 2012, 01:22:12 am ---Hello,
You have installed 9.3 with Hd6000 ??
--- End quote ---
If you mean the 9.3 version of CRT_EMU driver, yes I tried and it said the hardware wasn't supported.
--- End quote ---
So basic modeline work on hd 6XXX without magic resolution? even if 320x240 vertical are interlace on your monitor.. it works with upgrade anydrivers?
Well just antoher question for calamity, i guess magic resolution on arcade Monitor (hantarex) provide wide range of modeline, but , i don't have 1234X224?
I add tthem in reslist and modeline and now this work flawlessly but.. it's a bug?
ahofle:
--- Quote from: caskad on January 17, 2012, 02:46:47 pm ---
--- Quote from: ahofle on January 17, 2012, 12:13:49 pm ---I'm actually using 'CGA' for monitor type.
Well a bit of an update. I booted into safe mode and uninstalled the drivers there -- rebooted again and installed the CRT_EMU driver (note I haven't run vmmaker yet). Now I see a ton of 15khz resolutions. I'm a little hesitant to run vmmaker because I now have a bunch of 15khz resolutions, but gmame is still picking 320x240 double scanned for vertical 320x240 games. Not sure why. I will probably try running vmmaker tonight to see what happens. I don't have any 1234x resolutions currently.
--- Quote from: caskad on January 17, 2012, 01:22:12 am ---Hello,
You have installed 9.3 with Hd6000 ??
--- End quote ---
If you mean the 9.3 version of CRT_EMU driver, yes I tried and it said the hardware wasn't supported.
--- End quote ---
So basic modeline work on hd 6XXX without magic resolution? even if 320x240 vertical are interlace on your monitor.. it works with upgrade anydrivers?
--- End quote ---
I never got any custom 15khz modeline to work with the 6000 series card, trying both CRT_EUM driver and the magic resolution method.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version