Software Support > GroovyMAME
Updated driver for AMD APU (Radeon HD 6410D)?
ahofle:
I'm guessing there is a problem because groovymame is picking the 31khz 320x240. In fact I don't recall even seeing a 1234x240 or a 15khz 320x240. I'll try the catuninstaller and report back.
ahofle:
I uninstalled everything and ran catuninstall in safe mode and then reinstalled the crt_emu driver. After rebooting and running vmmaker, it's still only creating 24 modelines. Is that normal? I've also attached screenshots of the arcadeOSD modes -- still only 4 1234x resolutions and groovymame is picking the doublescanned 320x240 for those games, not the 1234x240.
-------------------------------------------------------------
:: VideoModeMaker :: - version 1.3b - by Calamity - 2008/2011
-------------------------------------------------------------
monitor_specs line ignored
CRT_EmuDriver 1.2 found! Based on Catalyst 09.3
53 different video modes found.
Generating dynamic mode table... 29 redundant video modes found.
Reducing mode list... 0 video modes dropped.
24 modelines generated.
Catalyst version 09.3 found in .\Driver\
Updating driver...
1 file(s) copied.
Storing modelines in system registry...
System must be restarted for the changes to take effect.
Finished. Press any key...
caskad:
Hello,
You have installed 9.3 with Hd6000 ??
Calamity:
--- Quote from: ahofle on January 16, 2012, 11:52:07 pm ---I uninstalled everything and ran catuninstall in safe mode and then reinstalled the crt_emu driver. After rebooting and running vmmaker, it's still only creating 24 modelines. Is that normal?
--- End quote ---
Yes, it's normal, keep in mind that the magic resolution method only needs a bunch of modelines. It seems you're using the "GENERIC" monitor, which is fine.
--- Quote ---I've also attached screenshots of the arcadeOSD modes -- still only 4 1234x resolutions and groovymame is picking the doublescanned 320x240 for those games, not the 1234x240.
--- End quote ---
That's because you're still booting with the LCD attached, and Windows is hiding every mode which considers not suitable for it. Check Arcade_OSD when booting with the arcade monitor only.
As for the GroovyMAME issue, please get me a log to see why it's not picking the 1234x mode, something must be wrong there.
ahofle:
I'm actually using 'CGA' for monitor type.
Well a bit of an update. I booted into safe mode and uninstalled the drivers there -- rebooted again and installed the CRT_EMU driver (note I haven't run vmmaker yet). Now I see a ton of 15khz resolutions. I'm a little hesitant to run vmmaker because I now have a bunch of 15khz resolutions, but gmame is still picking 320x240 double scanned for vertical 320x240 games. Not sure why. I will probably try running vmmaker tonight to see what happens. I don't have any 1234x resolutions currently.
--- Quote from: caskad on January 17, 2012, 01:22:12 am ---Hello,
You have installed 9.3 with Hd6000 ??
--- End quote ---
If you mean the 9.3 version of CRT_EMU driver, yes I tried and it said the hardware wasn't supported.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version