Main > Main Forum

Ultralux button construction?

(1/3) > >>

Knightlore:
Okay, this is kind of embarrasing but I've spent 20 minutes trying to work this out.  :banghead:

I can't work out how the microswitch sits in the led holder thingy.  The only way it goes together, when you press the button the white thing misses the little red button on the microswitch.

I'm sure I'm being really thick here, but will someone please enlighten me.

Here's a photo to illustrate :



Knightlore:
Bump, still at a loss.  I've looked at my old bartop control panel with standard buttons (it's been a while) and that doesn't really tell me anything other than the plastic bit should be lining up with the microswitches.

BobA:
Button fits in sideways with the ground or common on the outside.   The liittle pins hold the button in place so the plunger can hit the button in the proper place.

In the disassembled pic the red on the button should face down so the plunger can hit it. 

BadMouth:
Looks like it just needs rotated to me.  ???
The lamp holder goes in the same way as the tail-light of a car.
Push in and twist.

BobA:
Rotate the light/switch assembly 180 degrees.   

Navigation

[0] Message Index

[#] Next page

Go to full version