Main > Main Forum
Coin Buttons / Coin Door
scream1973:
No go
Tried this as well
As soon as i hook up either coin door switch .. button 2 doesnt function ..
But one of the coin door switches will
Thenasty:
You only need 1 GND and daisy chain it to all that needs GND.
Make sure the Buttons/Switches are in working order.
RandyT:
Everything going to one ground is probably better than two, but it still should have worked as wired. It looks to me like the wires could be connected to the NC terminals on at least one of the coin door switches, instead of the NO. If this is true, it would have the effect of locking out the other buttons connected to that input.
scream1973:
Let me dig deeper and see if i can see what the terminals on he switches are.
Maybe one of the switches is different than the other one..
The buttons work perfectly on thier own.
All the grounds daisy chain.. I was just trying a second one as another potential fix.
Minions:
On my coin door switches they were different. The NO was swapped, though the ground was at the same spot it normally is. Took me a few minutes to figure that out as it was causing all kinds of wonky problems with my FE Maximus Arcade.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version