Main > Main Forum
Coin Buttons / Coin Door
scream1973:
How can i wire this so that both will work at the same time..
As soon as i hook up the coin door switches the button stops functioning..
Ie button 1 and coin slot one both wired to ipac player 1 .. only the slot works
Thenasty:
no need to make it work at the SAME TIME, just one at a time will do...
You need to make sure its wired in parallel and making sure it's connected to NO and GND on the switches.
scream1973:
I have the GNDS on the buttons and coin door switches all connected to common gnd on the ipac.
NO coin switch 1 / button 1 to player 1 coin on ipac
NO coin switch 2 / button 2 to player 2 coin on ipac.
When wired like this only the coin door switches are functional the buttons are not
Thenasty:
here is drawing
scream1973:
For all intensive purposes this is what i currently have configured..
Switch1/2 are wired to the ipac at the same time and come out in parrallel. and the gnds are daisy chained to the common daisy chain..
i am going to strip the wires back a bit more and see what happens with it if i try it exactly as you have drawn
Navigation
[0] Message Index
[#] Next page
Go to full version