Author Topic: Broke solder pad on wired 360 controller board (late), need alternate location (Read 1684 times)

bobotech · « **on:** March 22, 2011, 02:05:49 pm »

I got my 360 board all wired up except for the 2 triggers. It has been working fine however today I decided to add the resistors and hook up the two triggers.

The problem is that I pulled out the center pad on the right trigger when trying to put the resistor in place. I wonder if anyone has an alternate location for that center pad?

Ugh.

SavannahLion · « **Reply #1 on:** March 22, 2011, 02:37:27 pm »

Can't you just follow the trace until you find a suitable location?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Broke solder pad on wired 360 controller board (late), need alternate location (Read 1684 times)

bobotech

Broke solder pad on wired 360 controller board (late), need alternate location

SavannahLion

Re: Broke solder pad on wired 360 controller board (late), need alternate location