Main > Main Forum
No yoke from Ram Controls
ids:
Thanks for the link. I've noticed there is another PEC, an Indian company. However, the "Made In Canada" on the device makes me think it's the one I linked earlier. Your digikey link appears to be for the Canadian ones, so with a good part number, I could be in luck. I'll take a closer look at it later, and failing that, remove it in hopes of finding a number stamped somewhere. Alternatively, specs might narrow it down (dimensions, etc).
Thanks again to korendog for the offer too. BYOAC is the best - very supportive, thanks.
zallax:
According to the pic of the 5K pots on the Ram Controls wiki page http://wiki.arcadecontrols.com/wiki/Ram_Controls, the pots are custom made. You might not be able to outsource.
ChadTower:
--- Quote from: zallax on January 20, 2011, 03:01:19 pm ---According to the pic of the 5K pots on the Ram Controls wiki page http://wiki.arcadecontrols.com/wiki/Ram_Controls, the pots are custom made. You might not be able to outsource.
--- End quote ---
That statement is based on info from Dave. He isn't exactly credible here.
JustMichael:
--- Quote from: ChadTower on January 20, 2011, 04:09:56 pm ---
--- Quote from: zallax on January 20, 2011, 03:01:19 pm ---According to the pic of the 5K pots on the Ram Controls wiki page http://wiki.arcadecontrols.com/wiki/Ram_Controls, the pots are custom made. You might not be able to outsource.
--- End quote ---
That statement is based on info from Dave. He isn't exactly credible here.
--- End quote ---
Yep Dave and credible parted ways just like the Red Sea (and about as long ago to I bet!)
Bender:
--- Quote from: zallax on January 20, 2011, 09:48:42 am ---I ordered mine Sunday. After looking at an invalid tracking number for days, I sent an e-mail, which I was assured they were late dropping off at store but should arrive the next day. I sent another e-mail when it did not arrive. I got a response that there was a problem at the UPS store, but now fixed. Hours later, my tracking number became valid. Right now, the package is on the truck "out for delivery" after leaving Ontario, CA (California, not Canada) just yesterday evening. Now, I hope its just in one piece after hearing all the bad packaging woes.
--- End quote ---
I got the same exact story about the UPS store. Mine was ordered last friday so it's possible they were dropped off together on mon. or tue. at and there was an issue at the UPS store (or I think they really just went out thursday)
Long story short GOT MINE TODAY! Less than a week to the north east, not bad
the build is awesome, The packing was pretty good, but it did seem possible that if the box was crushed the back gears could be damaged, but the box would have to be pretty abused in transit
I'll fire it up the weekend to make sure everything works
Zallex, get yours?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version