Main > Main Forum
No yoke from Ram Controls
Bender:
looks like it should be here today or tomorrow :applaud: :applaud:
zallax:
I ordered mine Sunday. After looking at an invalid tracking number for days, I sent an e-mail, which I was assured they were late dropping off at store but should arrive the next day. I sent another e-mail when it did not arrive. I got a response that there was a problem at the UPS store, but now fixed. Hours later, my tracking number became valid. Right now, the package is on the truck "out for delivery" after leaving Ontario, CA (California, not Canada) just yesterday evening. Now, I hope its just in one piece after hearing all the bad packaging woes.
korendog:
IDS,
Hit me up with a PM if Dave doesn't get back to you regarding that POT. I might have a replacement for you. -J
ids:
--- Quote from: korendog on January 20, 2011, 11:57:51 am ---IDS,
Hit me up with a PM if Dave doesn't get back to you regarding that POT. I might have a replacement for you. -J
--- End quote ---
That's very generous. Thank you very much for the offer of a potential POT replacement. Before I bother you with this, I am going to try one more avenue with Dave. It was actually a friend who placed the order for me - so I'll bug him to nag Dave. It occurred to me that I may be getting the cold shoulder because there is no correlation on Dave's end between me and a Yoke (a lot of assumptions here). If that fails, anything you could do would be greatly appreciated. I will definitely PM if needed - thanks!
Zallax - as far as packaging, mine was packed reasonably well, could not imagine damage in transport. (my POT problem would not be from shipping)
Zallax/Bender - Hopefully you'll have them soon, and they work. The quality overall is commendable - this thing should last a lifetime. I'd not be afraid of having 5 year olds beating on the thing (but if they do, I'd kick their a** just the same). Only complaint otherwise, is that while the sticker has holes for the screws, they seem a bit small. Perhaps it's best to remove the screws, apply sticker, then let the screw heads rest over the sticker. Maybe I missed the memo on this?
I feel really bad for those who have been waiting for so long. Would love to hear if/when these are resolved.
fwiw, I'm thinking this is the POT manufacturer Dave used: http://www.precisionelectronics.com I don't think they'd allow purchase of small quantities, however. If that IS them, and IF the POT was not a custom job, then I'd have to correlate what I have to their part numbers, somehow (need to take a closer look at it, perhaps I'll find a more detailed part#).
Thanks - will keep you posted.
HaRuMaN:
Digikey sells PEC potentiometers in as low a quantity as 1... you just need a better part number.
http://search.digikey.com/scripts/DkSearch/dksus.dll?Cat=262965&chp=0&FV=fff40004,fffc0062
You can then narrow the search by selecting the 5K ohm filter
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version