hi everyone, i'm new here but have a problem with my Rowe. I have a Rowe R92 and until yesterday it worked great. I screwed up, i admit it and feel very stupid about it, but here's the problem. I was going to instal the remote so that i could change the volume and skip song controls without having to reach behind the machine to do it. So, i open the box and inside is the box on the left that holds the amp and light controls. on the door to that box is a wire contact strip with a red wire and black wire connected. I disconnected those two wires, then thought better about messing with this since i really don't know anything about it and put those two wires back. Now, there is no sound. So, thinking i tripped some sort of saftey switch, i started looking around for a reset button, i found one that did nothing, then i found another on the box that controls the light flashing sensitivity so i pressed it, now the lights don't work. I've decided that i should probably call a technician to fix this before i really damage it but thought i would try here first in case it's a fuse or something. It seems to work fine though, other than the lights not working and no sound, but it picks up records, plays them, with no sound, and puts them back. it's all in working order except for what i messed up. Am i missing something simple or should i just do what i should have done in the first place and call a qualified service tech?