Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: speedklz on November 13, 2009, 02:39:19 pm

Title: COnvergence
Post by: speedklz on November 13, 2009, 02:39:19 pm

Convergence is off on my wg25k7100 which rings adjust the green?

Title: Re: COnvergence
Post by: Kevin Mullins on November 13, 2009, 03:50:01 pm

Grab the K7000 manual here:
http://arcarc.xmission.com/PDF_Monitors/Wells%20Gardner%20K7000%20Manual.pdf (http://arcarc.xmission.com/PDF_Monitors/Wells%20Gardner%20K7000%20Manual.pdf)

It's laid out in there pretty well.
Generally red/blue adjust TO the green.

Title: Re: COnvergence
Post by: speedklz on November 13, 2009, 04:08:54 pm

Dont tell me that.. THe red and blue are spot on but the green is shifted up just slightly, but enough to make it look bad.

Title: Re: COnvergence
Post by: SirPeale on November 13, 2009, 04:45:42 pm

First, mark your rings with a marker in a straight line.  That way you can always return the rings back to their original position.

What I do is wiggle one slightly to see which color moves.  If its the wrong one, put it back and try the next.

Title: Re: COnvergence
Post by: Kevin Mullins on November 13, 2009, 05:15:44 pm

Quote from: speedklz on November 13, 2009, 04:08:54 pm

THe red and blue are spot on

Spot on in relationship to what ?  ;)
There are rings that move the red and blue collectively as a pair.

Quote from: speedklz on November 13, 2009, 04:08:54 pm

but the green is shifted up just slightly, but enough to make it look bad.

Is the difference consistent throughout the monitor screen or just one particular area ?

Title: Re: COnvergence
Post by: speedklz on November 14, 2009, 12:06:06 pm

I use nokia monitor test for the convergence pattern and the blue and red on right but the green is shifted up slightly on all parts of the monitor.