Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: fazz on April 13, 2009, 09:25:57 am

Title: Newbie - Galaxian PCB problem
Post by: fazz on April 13, 2009, 09:25:57 am

Hi

I have acquired two galaxian boards, one logitech and one midway.

I am trying to run in a jamma cab using this http://lizardlick.com/images/parts/adapters/galax2j.jpg

The Midway one has no daughter board and just gives a few coloured blocks, so i think I was sold a pup with this one.

The logitech one appears to work fine and I have played the game successfully but I am getting NO sound, I have adjusted the volume adjuster on the board  but this has not helped.  I was wondering if there is something else I need to do, if its something to do with the adapter im using or if the pcb is faulty.

Any pointers or suggestions most welcome.

Title: Re: Newbie - Galaxian PCB problem
Post by: OldTymeToys on April 15, 2009, 03:40:51 pm

Quote from: fazz on April 13, 2009, 09:25:57 am

Hi

I have acquired two galaxian boards, one logitech and one midway.

I am trying to run in a jamma cab using this http://lizardlick.com/images/parts/adapters/galax2j.jpg

The Midway one has no daughter board and just gives a few coloured blocks, so i think I was sold a pup with this one.

The logitech one appears to work fine and I have played the game successfully but I am getting NO sound, I have adjusted the volume adjuster on the board  but this has not helped.  I was wondering if there is something else I need to do, if its something to do with the adapter im using or if the pcb is faulty.

Any pointers or suggestions most welcome.

You may find your answer over on the Klov boards- those guys are experts on stuff like this: http://forums.arcade-museum.com/