Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: CIA_Guy on January 23, 2005, 07:23:45 pm

Title: Coin Mech problem
Post by: CIA_Guy on January 23, 2005, 07:23:45 pm: I've got an original Defender coin door, but it's missing the mechanisms.
Title: Re: Coin Mech problem
Post by: SirPeale on January 23, 2005, 07:32:20 pm: Had to go check my Defender door (just a bare door, not on a cab) and I have no idea where that part is. I suspect I'm missing it as well.
Title: Re: Coin Mech problem
Post by: CIA_Guy on January 23, 2005, 07:56:57 pm: The mechs don't seem to reliably drop the coins through, so I think the missing part holds everything in place a little better. This is one of the silver doors, so it might be a little different on the inside than the black doors...you never know! The mech work perfectly in another door, so I know they aren't the problem.
Title: Re: Coin Mech problem
Post by: Ken Layton on January 23, 2005, 10:55:41 pm: It's a common Williams pinball part. You want Williams part number 1A-4253 Rejector Locking Plate. Order it from www.pbresource.com
Title: Re: Coin Mech problem
Post by: CIA_Guy on January 24, 2005, 08:23:38 pm: Quote from: Ken Layton on January 23, 2005, 10:55:41 pm
It's a common Williams pinball part. You want Williams part number 1A-4253 Rejector Locking Plate. Order it from www.pbresource.com

Thanks for the info...I went to the site and tried to locate the part....I couldn't find a search function, but I sent an email. I might pick up a few other parts when I make the order.
Title: Re: Coin Mech problem
Post by: Ken Layton on January 25, 2005, 06:14:36 pm: It's not on the site. There's a lot of stuff not on the site. You have to contact Steve either by phone or email with part numbers in hand.