Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: rock145 on July 23, 2015, 07:19:26 pm

Title: how to change 6 pin molex connection to 15 pin D-sub
Post by: rock145 on July 23, 2015, 07:19:26 pm

Hi, I am going to buy this WELLS GARDNER MODEL # 25K2193 monitor I want to know if is possible to make 15 pin D-sub connection to the monitor to connect to pc.

Title: Re: how to change 6 pin molex connection to 15 pin D-sub
Post by: yotsuya on July 23, 2015, 07:51:04 pm

Quote from: rock145 on July 23, 2015, 07:19:26 pm

Hi, I am going to buy this WELLS GARDNER MODEL # 25K2193 monitor I want to know if is possible to make 15 pin D-sub connection to the monitor to connect to pc.

Yes, it's possible, but you need to make sure your video card is putting out the correct signal.

Title: Re: how to change 6 pin molex connection to 15 pin D-sub
Post by: rock145 on July 23, 2015, 08:09:18 pm

Quote from: yotsuya on July 23, 2015, 07:51:04 pm

Quote from: rock145 on July 23, 2015, 07:19:26 pm

Hi, I am going to buy this WELLS GARDNER MODEL # 25K2193 monitor I want to know if is possible to make 15 pin D-sub connection to the monitor to connect to pc.

Yes, it's possible, but you need to make sure your video card is putting out the correct signal.

Thanks for the reply. I don't know much about arcade monitors could you provide me with a guide,tutorial or video on how to do this. About the video card I can use ati 4360 with groovymame.

Title: Re: how to change 6 pin molex connection to 15 pin D-sub
Post by: rock145 on July 24, 2015, 02:44:57 pm

Will this http://www.ultimarc.com/store/section.php?xSec=11 (http://www.ultimarc.com/store/section.php?xSec=11)  VGA Breakout Cable work? Are these only compatible with arcavga cards only or can I use it with ati cards and groovymame.