Build Your Own Arcade Controls Forum
Software Support => GroovyMAME => Topic started by: limner on June 05, 2015, 09:00:22 am
-
hi
i'm using groovymame with mame 0.155b and a WG D9400 monitor arcade
i've noticed that somethimes the resolution used is not exact the original used by the chosen game but close to it: is it possibile to use always the exact resolution?
Thanks
-
That depends. Some resolutions like 256x256@60 are impossible to set on typical arcade monitors. With what games you have problems ?
-
Is it 224p vs 240p what you're concerned about?
-
i don't know if it is an issue or is something that can't be fixed but as example
1) d&d shadow over mistara
Video 384x224
Switchres 384x240p
2)demon frost
Video 448x224
Switchres 448x240p
Those are only a couple of exaples where Video is not equal to Switchres....maybe is it normal?
-
hello limner this is normal and expected behaviour for switchres to choose a 240p mode when a 224p game is run. don't worry, there is not any unwanted scaling going on (and if there is, it is easily resolved!) :)
-
ah ok
are there any resolutions that should be added manually?
i only installed groovymame and crt_emudrive....this is the first time i use those tool so i would like to understand if there is more that can be done in order to use my hardware (an arcade monitor Wells Gardner d9400)
-
I would recommend reading this documentation at the link below to familiarise yourself with groovymame and crt emudriver:
http://geedorah.com/eiusdemmodi/forum/viewforum.php?id=1 (http://geedorah.com/eiusdemmodi/forum/viewforum.php?id=1)
-
GM is running my 224 vertical games at 256 vertical res. I have a 240 res mode defined and working. Should GM be choosing the 240 mode instead?
-
GM is running my 224 vertical games at 256 vertical res. I have a 240 res mode defined and working. Should GM be choosing the 240 mode instead?
Yoy have an horizontal monitor don't you?
-
GM is running my 224 vertical games at 256 vertical res. I have a 240 res mode defined and working. Should GM be choosing the 240 mode instead?
Yoy have an horizontal monitor don't you?
Yes I do. Ignore me, I got the H and V res mixed up. :-[
I've just been trying to get Scramble to work without glitchy scrolling, which it does at native 256 vertical mode (on my horizontal monitor).
-
I've just been trying to get Scramble to work without glitchy scrolling, which it does at native 256 vertical mode (on my horizontal monitor).
Force -syncrefresh for that game. It will run smooth but slower. Or try -monitor arcade_15ex
-
I've just been trying to get Scramble to work without glitchy scrolling, which it does at native 256 vertical mode (on my horizontal monitor).
Force -syncrefresh for that game. It will run smooth but slower. Or try -monitor arcade_15ex
I'll give that a try. Thanks as always, Calamity. :)
-
I tried forcing syncrefresh but am still getting glitchy scrolling. MAME does report the game is running at 99% as expected, though. I even tried forcing waitvsync but the glitching persists.
-
OK, the glitchy scrolling was caused by having frame delay set to 4. Set it back to 0 and now scrolling is silky smooth. :)