Recent Posts

You need a PAC Drive for this use case, not a PacLed64. 

https://www.ultimarc.com/output/led-and-output-controllers/pac-drive/

I'm using a PAC Drive to control a rather long LED strip in my Daytona USA Twin marquee.   It pulls power directly from the 12v on the PSU power supply (+), and then the negative wire (-) is wired to the PAC Drive to switch on an off.

If you want to see my LED strip array - http://forum.arcadecontrols.com/index.php/topic,167512.msg1768246.html#msg1768246

Please, read this - https://forum.arcadecontrols.com/index.php/topic,148828.msg1638016.html#msg1638016

and  https://forum.arcadecontrols.com/index.php/topic,159586.msg1678392.html#msg1678392

Please not that it's rather TVs problem not a modelines since such behavior I can observer on original SNES on my TV for example on Konami white logos last line ends in the midle.

In my case Sony TV was problem.

yes you can contact me or NJZ3

I would interested but if this work on two CRT setup ?

Thanks for the solution! I'll give it a shot next time I turn the machine on.

<last reserved space for later announcements>

<Reserved for yet other later announcements>

<Reserved for later announcements>

Big announcement for GUN4IR!

With many people now owning and enjoying GUN4IR, we can move forward with the next step for our system. New firmware and hardware options!

Our diamond style IR LEDs setup have always been the best in terms of accuracy and distance to the display, but we’ve heard the community’s cries for the older "legacy" styles.
Moving forward, with gun4ir you can expect support for 2 or 4 led points using:
•    Sensor bars
•    Rectangle shape and LEDs in the corners
•    And of course, our own diamond shape is still fully supported and encouraged

When using the legacy shapes and bars, you will lose accuracy/stability and generally need to have greater distance to your display, but we understand some users can’t install the GUN4IR diamond shape on their setup and are fine with the trade off.
Since it will be using the same powerful GUN4IR code that has been perfected over years of real world testing and user feedback, you can rest assured you will have the best support for any setup.

The best part? You will not need to buy new hardware for your existing GUN4IR lightguns or modify them in any way. They’re already compatible!

This next firmware will also come with several new features and improvements that have been announced/discussed before such as:
•    Full analog stick support
•    Improved feedback handling
•    More feedback options
•    More button options
•    Linux GUI support
•    And a lot of other surprises 😉

Coming this summer!

We want to thank this awesome community for sticking with us, GUN4IR has always been a passion project and could not have reached this level without your support.

As always, to keep up to date with GUN4IR, the best places are here and our Discord server: https://discord.gg/muCdu3b4hH

Stay tuned for the next big announcement!

Doesn't matter that it's basic internally. It still no doubt has bits and pieces to restore/replace. Bakelite knobs for instance. I totally dig it da old man. And I agree the forum format is best for these hobbies. Don't of anything of hand though.

This is a very thoughtful gift and it turned out great!  Love the custom speaker grills.  Awesome work!