Arcade Collecting > Restorations & repair

R-Type - Let's try to bring this one back.....

<< < (3/6) > >>

EVAWINGZERO:
Hey all, I'm getting ready to head to Tallahassee for business for the next week. I won't be able to post anymore pictures, but here is a quick one of the board. It looks like it is one min board in the middle, and two smaller boards on the outsides.



I'll take the boards out when I get back and take some better pictures.


Thanks again for the help

ckong:
 :applaud: :applaud: Good for you to try to repair/restore this beautiful cab.

edge10:

--- Quote from: EVAWINGZERO on January 17, 2010, 10:20:25 am ---Hey all, I'm getting ready to head to Tallahassee for business for the next week. I won't be able to post anymore pictures, but here is a quick one of the board. It looks like it is one min board in the middle, and two smaller boards on the outsides.



I'll take the boards out when I get back and take some better pictures.


Thanks again for the help




--- End quote ---

It loos like the upper right connector isn't plugged in correctly.  Could it be that easy?

WunderCade:
Yeah, first carefully remove those two connectors on the cage door and clean the contact pins, they look rusty or dirty, then replace the connectors making sure they are seated all the way down on the pins.

The good news is that it looks like you have a complete cab, no missing parts. Nice.

What kind of power distribution center is in the bottom of the cab. Pics??

Spyridon:
Your side art looks decent, but if you want to replace it, it looks like Rich from This Old Game is going to be reproducing it if he gets enough interest.

Navigation

[0] Message Index

[#] Next page

[*] Previous page