Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: ***Fixed***Electrohome G05-801 precap advice  (Read 1818 times)

0 Members and 1 Guest are viewing this topic.

Tenn_pin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 45
  • Last login:January 01, 2014, 06:57:02 pm
***Fixed***Electrohome G05-801 precap advice
« on: November 21, 2009, 09:50:48 pm »
I have a G05 with no glow and DOA.  The fuse F100 was blown.  I replaced the fuse and still no glow, but the fuse did not blow this time.  What part(s) should I be looking at?  This is the first 05 I have tried to repair, and I would like to do a shot gun repair of all usually bad parts.  Is there a flow chart available?

Thanks,
R

 ??? :applaud: :applaud: :applaud:
« Last Edit: November 27, 2009, 08:48:54 pm by Tenn_pin »
Logged

Tenn_pin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 45
  • Last login:January 01, 2014, 06:57:02 pm
Re: Electrohome G05-801 precap advice
« Reply #1 on: November 27, 2009, 08:04:12 pm »
Well gang, it turned out to be a cold solder joint on R104 (leg going to P100-3). I reflowed the solder joint and still had not connection. So I got a piece of wire and jumpered the two connections and now it works.

R
Logged
Pages: [1]
  
Go Up
« previous next »